Read chemical guys eqp322 big mouth professional foam cannon reviews, rating & opinions:

Check all chemical guys eqp322 big mouth professional foam cannon reviews below or publish your opinion.

100 Reviews Found

Sort by: Most Accurate (default) | Newest | Top Rated

  • 0

    Useful review?

    Chemical Guys EQP322 Big Mouth Professional Foam Cannon []  2020-1-29 20:48

    They sent me a fresh bottle that works a lot e threads are junk. You fill this up with soap and water and it falls right off half the time. You cannot tighten it. What a horrible defect in design or manufacturing. This literally worked well a few times and now its the most frustrating waste of i have experienced in latest memory. Its too poor too, the rest of this cannon is quite nice. However i can't use it and its too late to return it.

    0  


  • 0

    Useful review?

    Chemical Guys EQP322 Big Mouth Professional Foam Cannon []  2020-1-29 20:48

    The third time I used this the bottle pops off and my soap spills out everywhere. If I twist the bottle on it just slips and won’t seal. Want I could exchange it! Expensive bummer for sure.

    0  


  • 0

    Useful review?

    Chemical Guys EQP322 Big Mouth Professional Foam Cannon []  2020-1-29 20:48

    I have had this product for approximately a year now. Everything about this product is unbelievable minus the Lid. I purchased the chemical guys brand as I like a lot of their products and use them frequently. However the lid is not threaded well and almost every time I fill up the bottle and attach it to my pressure washer, the bottle pops off when I pull the trigger and the water and soap goes everywhere. I have been unable to use this but it’s too late to return e rest of the product is of amazing quality. But I can’t recommend anyone this product unless they resolve this issue. I spent close to $100 on this and it’s unusable and not returnable. I want I had better luck.

    0  


    Add your opinion on chemical guys eqp322 big mouth professional foam cannon or scroll down to read more reviews ↓

     

  • 0

    Useful review?

    Chemical Guys Torq EQP322 Big Mouth Professional Foam Cannon []  2020-7-26 20:40

    People say that the Amazon foam cannon in better and like $90 cheaper. But from private experience I can tell you that Amazon one sucks and it’ll break within 2-3 washes . This one on the other hand.... I’ve used it to wash about 30 vehicles since & it is just as amazing as when I first got it. This plus the honey dew snow foam from chemical guys is amazing. 1000000% recommend

    0  


  • 0

    Useful review?

    Chemical Guys EQP322 Big Mouth Professional Foam Cannon []  2020-1-29 20:48

    People say that the Amazon foam cannon in better and like $90 cheaper. But from private experience I can tell you that Amazon one sucks and it’ll break within 2-3 washes . This one on the other hand.... I’ve used it to wash about 30 vehicles since & it is just as amazing as when I first got it. This plus the honey dew snow foam from chemical guys is amazing. 1000000% recommend

    0  


  • 0

    Useful review?

    Chemical Guys Torq EQP322 Big Mouth Professional Foam Cannon []  2020-7-26 20:40

    They sent me a fresh bottle that works a lot e threads are junk. You fill this up with soap and water and it falls right off half the time. You cannot tighten it. What a horrible defect in design or manufacturing. This literally worked well a few times and now its the most frustrating waste of i have experienced in latest memory. Its too poor too, the rest of this cannon is quite nice. However i can't use it and its too late to return it.

    0  


  • 0

    Useful review?

    Chemical Guys Torq EQP322 Big Mouth Professional Foam Cannon []  2020-7-26 20:40

     Previously had the Trinova wide mouth foam cannon an was amazing for the value paid, but this partnered with my Yamaha Powerstroke 3100psi pressure washer and TORQ Shorty trigger makes for a much better and ease of use for getting a wide thick layer of foam to coat the vehicle. Fill it up to the second line with Chemical Guys Glossworkz soap, then the rest of the method with hot water. This combined with the 2 bucket wash way (additional 3rd bucket strictly for wheels) gets an awesome coating for the soap to start lifting off contaminants from your paint, rinsing first in your rinse bucket then reapplying clean suds in your second bucket before moving back to the emical Guys makes high quality products and countless instructional videos on their YouTube channel to create beginners into detail pros.

    0  


  • 0

    Useful review?

    Chemical Guys Torq EQP322 Big Mouth Professional Foam Cannon []  2020-7-26 20:40

    For years I have wanted something like this. The suds dispenser on presssure washers are a joke and I don’t wish to go to the vehicle wash just to obtain the sudsy e foam cannon covers the car very quickly, evenly, and fully with soap suds to loosen up the dirt and grime. If your car s needing a fast wash, this would work but if you have dirt on the vehicle, you will wish to still hand wash only regret is not discovering this earlier.

    0  


  • 0

    Useful review?

    Chemical Guys EQP322 Big Mouth Professional Foam Cannon []  2020-1-29 20:48

    As one of the reviews below says this thing has "poor thread execution". What this means is that it takes only about 1/4 of one turn to fully tighten the lid... which also means that only about 1/4 of one thread is engaged. As soon as you loosen the lid even a little bit the top basically falls off. This could easily happen just putting the thing on the ground. The lid and threads are just a very not good design. The threaded lip of the container and the threaded skirt of the lid should both be deeper to accommodate a couple more threads so the lid would spin on a full revolution or more. I am going to create something to secure the lid while it is installed. like a detent or maybe just drill a hole through both and insert a pin. Really shouldn't have jury rig this thing as $$ as it is, but there you go. I'll test to post a picture of my solution later if Amazon will allow me.Edit: To mitigate the problem with the not good lid threads I created a 3D printed plug to lock the lid in put while in use. See the image to obtain the gist of it. I can't post a link here but if you find Thingiverse with obvious tags you should be able to search it easily enough. Full directions posted there.

    0  


  • 0

    Useful review?

    Chemical Guys EQP322 Big Mouth Professional Foam Cannon []  2020-1-29 20:48

     Previously had the Trinova wide mouth foam cannon an was amazing for the value paid, but this partnered with my Yamaha Powerstroke 3100psi pressure washer and TORQ Shorty trigger makes for a much better and ease of use for getting a wide thick layer of foam to coat the vehicle. Fill it up to the second line with Chemical Guys Glossworkz soap, then the rest of the method with hot water. This combined with the 2 bucket wash way (additional 3rd bucket strictly for wheels) gets an awesome coating for the soap to start lifting off contaminants from your paint, rinsing first in your rinse bucket then reapplying clean suds in your second bucket before moving back to the emical Guys makes high quality products and countless instructional videos on their YouTube channel to create beginners into detail pros.

    0  


  • 0

    Useful review?

    Chemical Guys Torq EQP322 Big Mouth Professional Foam Cannon []  2020-7-26 20:40

    As one of the reviews below says this thing has "poor thread execution". What this means is that it takes only about 1/4 of one turn to fully tighten the lid... which also means that only about 1/4 of one thread is engaged. As soon as you loosen the lid even a little bit the top basically falls off. This could easily happen just putting the thing on the ground. The lid and threads are just a very not good design. The threaded lip of the container and the threaded skirt of the lid should both be deeper to accommodate a couple more threads so the lid would spin on a full revolution or more. I am going to create something to secure the lid while it is installed. like a detent or maybe just drill a hole through both and insert a pin. Really shouldn't have jury rig this thing as $$ as it is, but there you go. I'll test to post a picture of my solution later if Amazon will allow me.Edit: To mitigate the problem with the not good lid threads I created a 3D printed plug to lock the lid in put while in use. See the image to obtain the gist of it. I can't post a link here but if you find Thingiverse with obvious tags you should be able to search it easily enough. Full directions posted there.

    0  


  • 0

    Useful review?

    Chemical Guys Torq EQP322 Big Mouth Professional Foam Cannon []  2020-7-26 20:40

    I have had this product for approximately a year now. Everything about this product is unbelievable minus the Lid. I purchased the chemical guys brand as I like a lot of their products and use them frequently. However the lid is not threaded well and almost every time I fill up the bottle and attach it to my pressure washer, the bottle pops off when I pull the trigger and the water and soap goes everywhere. I have been unable to use this but it’s too late to return e rest of the product is of amazing quality. But I can’t recommend anyone this product unless they resolve this issue. I spent close to $100 on this and it’s unusable and not returnable. I want I had better luck.

    0  


  • 0

    Useful review?

    Chemical Guys Torq EQP322 Big Mouth Professional Foam Cannon []  2020-7-26 20:40

    I watched several Chemical Guys videos showing this foam cannon producing thick clinging foam. After further research I discovered they are using a gas powered pressure washer rated at 3.0 GPM or more. I have a SunJoe electric pressure washer and this TORQ EQP322 foam cannon will not produce thick foam with an electric pressure washer. I tried several various soaps including their Honeydew SnowFoam and all I got was thin watery foam that would not cling to my cars. Very disappointed! Was not able to return the foam cannon to Chemical Guys for a so I am stuck with it. The MTM Hydro PF22 is the foam cannon all the pros use.

    0  


  • 0

    Useful review?

    Chemical Guys Torq EQP322 Big Mouth Professional Foam Cannon []  2020-7-26 20:40

    I love this thing, it's so well created and so pro looking. My first foam cannon was a $19 type and it leaked and sprayed foam everywhere but where unneeded it, also you could hardly stand the thing up straight as it would fall over. In comparison, this unit is awesome, it doesn't fall over and the designers took all use cases into acc when they designed it. It's such a pity I can't obtain Chemical Guys soaps in my country as I would love to test em out but at least I managed to obtain my hands on this item. It's worth the money!!!

    0  


  • 0

    Useful review?

    Chemical Guys EQP322 Big Mouth Professional Foam Cannon []  2020-1-29 20:48

    I bought this thinking because everyone was comparing the cheaper foam cannons to the chemical guys brand and thought I'd go ahead and spend the additional and obtain the best. Boy was I wrong. All I got was soapy water sprayed on my truck. I could have filled a bucket with soapy water and dumped it on my truck and gotten more foam than this thing makes. I tried everything per instructions and per chemical guys video, more soap, less soap, warm water, hot water, cold water, less pressure, more pressure. Nothing worked. FYI, I'm using a commercial grade gas powered pressure washer and also using the chemical guys honey dew sno-foam for the soap. I spoke to chemical guys directly to see what I was doing wrong and the only thing they could tell me was to create a video of me using the foam cannon and send it to them, so I did and still no respond of why it wasn't producing foam. The only definitive thing they could tell me was I should return the item while I still able to keep a refund. I'd advise anyone looking for a foam cannon to look elsewhere.

    0  


  • 0

    Useful review?

    Chemical Guys EQP322 Big Mouth Professional Foam Cannon []  2020-1-29 20:48

    For years I have wanted something like this. The suds dispenser on presssure washers are a joke and I don’t wish to go to the vehicle wash just to obtain the sudsy e foam cannon covers the car very quickly, evenly, and fully with soap suds to loosen up the dirt and grime. If your car s needing a fast wash, this would work but if you have dirt on the vehicle, you will wish to still hand wash only regret is not discovering this earlier.

    0  


  • 0

    Useful review?

    Chemical Guys EQP322 Big Mouth Professional Foam Cannon []  2020-1-29 20:48

    I watched several Chemical Guys videos showing this foam cannon producing thick clinging foam. After further research I discovered they are using a gas powered pressure washer rated at 3.0 GPM or more. I have a SunJoe electric pressure washer and this TORQ EQP322 foam cannon will not produce thick foam with an electric pressure washer. I tried several various soaps including their Honeydew SnowFoam and all I got was thin watery foam that would not cling to my cars. Very disappointed! Was not able to return the foam cannon to Chemical Guys for a so I am stuck with it. The MTM Hydro PF22 is the foam cannon all the pros use.

    0  


  • 0

    Useful review?

    Chemical Guys EQP322 Big Mouth Professional Foam Cannon []  2020-1-29 20:48

    I love this thing, it's so well created and so pro looking. My first foam cannon was a $19 type and it leaked and sprayed foam everywhere but where unneeded it, also you could hardly stand the thing up straight as it would fall over. In comparison, this unit is awesome, it doesn't fall over and the designers took all use cases into acc when they designed it. It's such a pity I can't obtain Chemical Guys soaps in my country as I would love to test em out but at least I managed to obtain my hands on this item. It's worth the money!!!

    0  


  • 0

    Useful review?

    Chemical Guys Torq EQP322 Big Mouth Professional Foam Cannon []  2020-7-26 20:40

    I bought this thinking because everyone was comparing the cheaper foam cannons to the chemical guys brand and thought I'd go ahead and spend the additional and obtain the best. Boy was I wrong. All I got was soapy water sprayed on my truck. I could have filled a bucket with soapy water and dumped it on my truck and gotten more foam than this thing makes. I tried everything per instructions and per chemical guys video, more soap, less soap, warm water, hot water, cold water, less pressure, more pressure. Nothing worked. FYI, I'm using a commercial grade gas powered pressure washer and also using the chemical guys honey dew sno-foam for the soap. I spoke to chemical guys directly to see what I was doing wrong and the only thing they could tell me was to create a video of me using the foam cannon and send it to them, so I did and still no respond of why it wasn't producing foam. The only definitive thing they could tell me was I should return the item while I still able to keep a refund. I'd advise anyone looking for a foam cannon to look elsewhere.

    0  


  • 0

    Useful review?

    Chemical Guys Torq EQP322 Big Mouth Professional Foam Cannon []  2020-7-26 20:40

    The third time I used this the bottle pops off and my soap spills out everywhere. If I twist the bottle on it just slips and won’t seal. Want I could exchange it! Expensive bummer for sure.

    0  


  • 0

    Useful review?

    try these guys [more..]  2020-8-24 14:28
    [email protected]

    st lucie county clerk of court case find butte county superior court case find on the main page you could test here maryland district court case find That Website going here

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310 Torq Professional Foam Cannon []  2020-1-22 0:1

    I want there was a method to give a NEGATIVE 5-STAR rating for this product. I bought this bottle and only after using it 3-4 times, the plastic cap detached from the rest of the bottle. Upon contacting the company (product was still under warranty), Chemical Guys sent me a replacement bottle, which was of such cheaply created plastic that the first time I used it with my foam canon attachment, the heat from the spray operation caused the plastic to expand and obtain stuck to the bottle. The bottle itself disintegrated into multiple bits (such is the crappy quality of their products), the true icing on the cake was an email from the company informing me "their management squad has determined that there was nothing wrong with the bottle and that I should be responsible for removing the plastic that is stuck to the foam cannon attachment".$100 down the drain and a pledge to never anything from this company again that has such a not good customer service experience. They can hold their crappy products to themselves.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310 Torq Professional Foam Cannon []  2020-1-22 0:1

    I purchased this kit on 1/31/2017, the soaps are fine, I also purchased a couple of drying towels which work great. The foam cannon works fine, the bottle does not. The top of the bottle broke after about 5 uses. Unfortunately for me the 5th use was on 5/14/2017. I read the reviews about this event but thought it was just people over tightening the bottle. As a technician by trade I understand what needs gorilla strength and what does not its an eductor so an airtight seal is not necessary. I did not over tighten the bottle, the crack happened below the threads. It appears the bottle, when full of solution, can't help its own weight when hanging by the cannon.I contacted Chemical Guys and was told they have a 30 day warranty and this was an Amazon problem but they will be glad to me a fresh POS bottle for an on of $19.99, whatever. Method to stand behind your yourself a favor and by the foam cannon with amazing reviews, not the one with Chemical Guys logo on the bottle.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310 Torq Professional Foam Cannon []  2020-1-22 0:1

    Wanted to love this but 100% disappointed, I expected more, will never this Brand again. Used weekly since in February with a 3200PSI pressure washer, and it does not “Foam” at all. Been on YouTube, read posts, tried to adjust (the limited adjustments available) on the cannon itself, tried different levels of their overly priced soap -all with the same e foam adjustment knob is plastic Fits over a brass nut. Very not good design as the plastic knob will strip/stretch over the nut after adjusting several times, which mine did after a 5 or 6 uses. The brass assembly that screws on to the top of the bottle is a quality piece, but when unscrewing from the bottle to refill, 1/2 the time the cap stays snug on the bottle and instead unscrews from the bottom of the cannon. Most recently, the threaded and sleeved opening of the plastic bottle (that for screws into the bottom of the cannon have broken off in the cannon. For this money, I would expect this to last. Save some and aggravation something else.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310 Torq Professional Foam Cannon []  2020-1-22 0:1

    To all who has these foam cannons these plastic bottles will NOT latest more than a few times of use! These bottles are becoming expensive to continuously only after a few uses. This is the third one I’ve had to buy. What this company needs to is a metal bottle to avoid the tops breaking off. I have seen they have brass tops but think about it? They are still attached to plastic. I would hope the company would reimburse me for the previous orders or send me a supply of these until they have a metal bottle that can replace these. If I could leave a zero for this I would and you really have no choice but to these unless you go to a various foam cannon. Maybe going back to washing old school is the method to go, sometimes doing things the original method is better?!

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310 Torq Professional Foam Cannon []  2020-1-22 0:1

    The soap is fantastic, however the plastic cannister is cheap. The threads completely broke off after only three uses. I would like a replacement Foam Cannon container, however the little window of time to replace this has passed. I've attempted to call Chemical Guys directly, and the phone just rings and goes back to main menu so I have no method of getting a keep of anyone. For $91.00, this is a rip-off.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310 Torq Professional Foam Cannon []  2020-1-22 0:1

    Returned item. Does not have EQP_310 Torq on nozzle. It's genuineness is unknown to me. There are other stuff like the one sent to me for much less.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310 Torq Professional Foam Cannon []  2020-1-22 0:1

    ****Read****Product works 180% as intended. Exactly how Chemical Guys video represents it. Directions say to use 2-3 ounces of product per water container. I used about 3.5 ounces on 800mL out of 1,000. It's imperative you read the directions and use room temperature water to obtain amazing results. I build vehicles and detail them I was a skeptic and I must say I'm beyond impressed. I did my father-in-laws Q5 (black) without drying and it came out amazing! 5pm 80 degrees and in direct PORTANT!!!!!!!!I saw a lot of poor reviews about the bottle threads stripping out and leaking. Do yourself the favor and obtain a generic garden hose male/female fast release fitting for a garden hose gun. This will create each side have a fitting so you never need to remove it thus threads will never strip out. The hole for the fitting is just huge enough to feet the foam gun hose through it. Finally.... USE TEFLON TAPE FOR THE FITTINGS!!!!!!!!!! They go on rough without, once you place Teflon on they thread like l in all I'm beyond impressed with this product compared to related products and it's worth the price. I firmly believe that the negative ratings of "leaking" and "stripped threads" or "poor foam, broke first time" is from improper/neglected use. Below you can see the attachment I used from a garden hose that I spoke about above

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310 Torq Professional Foam Cannon []  2020-1-22 0:1

    Junk - Form Cannon broke after only a few uses. Past return period and manufacture won't stand behind it, only wants to me another one. Save your and one of the a lot of other ones on Amazon that are cheaper.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310 Torq Professional Foam Cannon []  2020-1-22 0:1

    I was very excited to obtain this foam cannon and I was willing to spend the additional in hopes of receiving a decent product. I was happy with how the cannon performed but one day when I walked outside to pick up the bottle for the second time, I lifted the bottle and the top stayed on my microfiber towels. I then inspected what was going on and I see that the threads have snapped off in the top while just laying in a basket. I called chemical guys and they didn't even give me the time of day about a so I called Amazon and the guy was very helpful and just did a full replacement. So I received another and was sure to not leave the top threaded on while not using the cannon. After 4 uses, I went to use it yesterday and boom it's broken again while I was getting ready to tighten the top. So I have since gotten a full and am going to search a various brand bottle and I really don't help chemical guys anymore. They have no customer service! Amazon does however take care of their customers!

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310 Torq Professional Foam Cannon []  2020-1-22 0:1

    I couldn't be happier, it works exactly as advertised. Hooked it up to my 3100 psi pressure washer. Took roughly half an hour to rinse/wash/rinse my truck. I intentionally tried the no-touch way first, just to see what the results would be. Truck was only sort of dirty, basically just covered in light dirt & pollen. When I was done I'd say the truck was 95% clean, certainly enough to consider it a successful "spruce up". Took a small detail spray and microfiber cloth to the locations directly behind the wheels, and it was done.Didn't have any problem adjusting from wide fan to jet & back, and the coverage was just like in the videos. Amazing product. While it is a bit expensive (watch the prices, as of this writing it's $13 more expensive than when I bought it. Seems to fluctuate), deducting a star for that is beautiful silly. I knew how expensive it was when I bought it, so how can I complain?

    0  


  • 0

    Useful review?

    Chemical Guys EQP346 TORQ Big Mouth Cannon & Watermelon Snow Foam, 128. Fluid_Ounces []  2020-1-19 22:59

    For years I have wanted something like this. The suds dispenser on presssure washers are a joke and I don’t wish to go to the vehicle wash just to obtain the sudsy e foam cannon covers the car very quickly, evenly, and fully with soap suds to loosen up the dirt and grime. If your car s needing a fast wash, this would work but if you have dirt on the vehicle, you will wish to still hand wash only regret is not discovering this earlier.

    0  


  • 0

    Useful review?

    Chemical Guys EQP346 TORQ Big Mouth Cannon & Watermelon Snow Foam, 128. Fluid_Ounces []  2020-1-19 22:59

    People say that the Amazon foam cannon in better and like $90 cheaper. But from private experience I can tell you that Amazon one sucks and it’ll break within 2-3 washes . This one on the other hand.... I’ve used it to wash about 30 vehicles since & it is just as amazing as when I first got it. This plus the honey dew snow foam from chemical guys is amazing. 1000000% recommend

    0  


  • 0

    Useful review?

    Chemical Guys EQP346 TORQ Big Mouth Cannon & Watermelon Snow Foam, 128. Fluid_Ounces []  2020-1-19 22:59

    I have had this product for approximately a year now. Everything about this product is unbelievable minus the Lid. I purchased the chemical guys brand as I like a lot of their products and use them frequently. However the lid is not threaded well and almost every time I fill up the bottle and attach it to my pressure washer, the bottle pops off when I pull the trigger and the water and soap goes everywhere. I have been unable to use this but it’s too late to return e rest of the product is of amazing quality. But I can’t recommend anyone this product unless they resolve this issue. I spent close to $100 on this and it’s unusable and not returnable. I want I had better luck.

    0  


  • 0

    Useful review?

    Chemical Guys EQP346 TORQ Big Mouth Cannon & Watermelon Snow Foam, 128. Fluid_Ounces []  2020-1-19 22:59

    I bought this thinking because everyone was comparing the cheaper foam cannons to the chemical guys brand and thought I'd go ahead and spend the additional and obtain the best. Boy was I wrong. All I got was soapy water sprayed on my truck. I could have filled a bucket with soapy water and dumped it on my truck and gotten more foam than this thing makes. I tried everything per instructions and per chemical guys video, more soap, less soap, warm water, hot water, cold water, less pressure, more pressure. Nothing worked. FYI, I'm using a commercial grade gas powered pressure washer and also using the chemical guys honey dew sno-foam for the soap. I spoke to chemical guys directly to see what I was doing wrong and the only thing they could tell me was to create a video of me using the foam cannon and send it to them, so I did and still no respond of why it wasn't producing foam. The only definitive thing they could tell me was I should return the item while I still able to keep a refund. I'd advise anyone looking for a foam cannon to look elsewhere.

    0  


  • 0

    Useful review?

    Chemical Guys EQP346 TORQ Big Mouth Cannon & Watermelon Snow Foam, 128. Fluid_Ounces []  2020-1-19 22:59

    I watched several Chemical Guys videos showing this foam cannon producing thick clinging foam. After further research I discovered they are using a gas powered pressure washer rated at 3.0 GPM or more. I have a SunJoe electric pressure washer and this TORQ EQP322 foam cannon will not produce thick foam with an electric pressure washer. I tried several various soaps including their Honeydew SnowFoam and all I got was thin watery foam that would not cling to my cars. Very disappointed! Was not able to return the foam cannon to Chemical Guys for a so I am stuck with it. The MTM Hydro PF22 is the foam cannon all the pros use.

    0  


  • 0

    Useful review?

    Chemical Guys EQP346 TORQ Big Mouth Cannon & Watermelon Snow Foam, 128. Fluid_Ounces []  2020-1-19 22:59

    I love this thing, it's so well created and so pro looking. My first foam cannon was a $19 type and it leaked and sprayed foam everywhere but where unneeded it, also you could hardly stand the thing up straight as it would fall over. In comparison, this unit is awesome, it doesn't fall over and the designers took all use cases into acc when they designed it. It's such a pity I can't obtain Chemical Guys soaps in my country as I would love to test em out but at least I managed to obtain my hands on this item. It's worth the money!!!

    0  


  • 0

    Useful review?

    Chemical Guys EQP346 TORQ Big Mouth Cannon & Watermelon Snow Foam, 128. Fluid_Ounces []  2020-1-19 22:59

     Previously had the Trinova wide mouth foam cannon an was amazing for the value paid, but this partnered with my Yamaha Powerstroke 3100psi pressure washer and TORQ Shorty trigger makes for a much better and ease of use for getting a wide thick layer of foam to coat the vehicle. Fill it up to the second line with Chemical Guys Glossworkz soap, then the rest of the method with hot water. This combined with the 2 bucket wash way (additional 3rd bucket strictly for wheels) gets an awesome coating for the soap to start lifting off contaminants from your paint, rinsing first in your rinse bucket then reapplying clean suds in your second bucket before moving back to the emical Guys makes high quality products and countless instructional videos on their YouTube channel to create beginners into detail pros.

    0  


  • 0

    Useful review?

    Chemical Guys EQP346 TORQ Big Mouth Cannon & Watermelon Snow Foam, 128. Fluid_Ounces []  2020-1-19 22:59

    As one of the reviews below says this thing has "poor thread execution". What this means is that it takes only about 1/4 of one turn to fully tighten the lid... which also means that only about 1/4 of one thread is engaged. As soon as you loosen the lid even a little bit the top basically falls off. This could easily happen just putting the thing on the ground. The lid and threads are just a very not good design. The threaded lip of the container and the threaded skirt of the lid should both be deeper to accommodate a couple more threads so the lid would spin on a full revolution or more. I am going to create something to secure the lid while it is installed. like a detent or maybe just drill a hole through both and insert a pin. Really shouldn't have jury rig this thing as $$ as it is, but there you go. I'll test to post a picture of my solution later if Amazon will allow me.Edit: To mitigate the problem with the not good lid threads I created a 3D printed plug to lock the lid in put while in use. See the image to obtain the gist of it. I can't post a link here but if you find Thingiverse with obvious tags you should be able to search it easily enough. Full directions posted there.

    0  


  • 0

    Useful review?

    Chemical Guys EQP346 TORQ Big Mouth Cannon & Watermelon Snow Foam, 128. Fluid_Ounces []  2020-1-19 22:59

    They sent me a fresh bottle that works a lot e threads are junk. You fill this up with soap and water and it falls right off half the time. You cannot tighten it. What a horrible defect in design or manufacturing. This literally worked well a few times and now its the most frustrating waste of i have experienced in latest memory. Its too poor too, the rest of this cannon is quite nice. However i can't use it and its too late to return it.

    0  


  • 0

    Useful review?

    Chemical Guys EQP346 TORQ Big Mouth Cannon & Watermelon Snow Foam, 128. Fluid_Ounces []  2020-1-19 22:59

    The third time I used this the bottle pops off and my soap spills out everywhere. If I twist the bottle on it just slips and won’t seal. Want I could exchange it! Expensive bummer for sure.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_312 TORQ Professional Foam Cannon and Honeydew Snow Foam Cleanser (1 Gal) []  2020-1-18 21:34

    The soap is fantastic, however the plastic cannister is cheap. The threads completely broke off after only three uses. I would like a replacement Foam Cannon container, however the little window of time to replace this has passed. I've attempted to call Chemical Guys directly, and the phone just rings and goes back to main menu so I have no method of getting a keep of anyone. For $91.00, this is a rip-off.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_312 TORQ Professional Foam Cannon and Honeydew Snow Foam Cleanser (1 Gal) []  2020-1-18 21:34

    ****Read****Product works 180% as intended. Exactly how Chemical Guys video represents it. Directions say to use 2-3 ounces of product per water container. I used about 3.5 ounces on 800mL out of 1,000. It's imperative you read the directions and use room temperature water to obtain amazing results. I build vehicles and detail them I was a skeptic and I must say I'm beyond impressed. I did my father-in-laws Q5 (black) without drying and it came out amazing! 5pm 80 degrees and in direct PORTANT!!!!!!!!I saw a lot of poor reviews about the bottle threads stripping out and leaking. Do yourself the favor and obtain a generic garden hose male/female fast release fitting for a garden hose gun. This will create each side have a fitting so you never need to remove it thus threads will never strip out. The hole for the fitting is just huge enough to feet the foam gun hose through it. Finally.... USE TEFLON TAPE FOR THE FITTINGS!!!!!!!!!! They go on rough without, once you place Teflon on they thread like l in all I'm beyond impressed with this product compared to related products and it's worth the price. I firmly believe that the negative ratings of "leaking" and "stripped threads" or "poor foam, broke first time" is from improper/neglected use. Below you can see the attachment I used from a garden hose that I spoke about above

    0  


  • 0

    Useful review?

    Chemical Guys EQP_312 TORQ Professional Foam Cannon and Honeydew Snow Foam Cleanser (1 Gal) []  2020-1-18 21:34

    Returned item. Does not have EQP_310 Torq on nozzle. It's genuineness is unknown to me. There are other stuff like the one sent to me for much less.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_312 TORQ Professional Foam Cannon and Honeydew Snow Foam Cleanser (1 Gal) []  2020-1-18 21:34

    I couldn't be happier, it works exactly as advertised. Hooked it up to my 3100 psi pressure washer. Took roughly half an hour to rinse/wash/rinse my truck. I intentionally tried the no-touch way first, just to see what the results would be. Truck was only sort of dirty, basically just covered in light dirt & pollen. When I was done I'd say the truck was 95% clean, certainly enough to consider it a successful "spruce up". Took a small detail spray and microfiber cloth to the locations directly behind the wheels, and it was done.Didn't have any problem adjusting from wide fan to jet & back, and the coverage was just like in the videos. Amazing product. While it is a bit expensive (watch the prices, as of this writing it's $13 more expensive than when I bought it. Seems to fluctuate), deducting a star for that is beautiful silly. I knew how expensive it was when I bought it, so how can I complain?

    0  


  • 0

    Useful review?

    Chemical Guys EQP_312 TORQ Professional Foam Cannon and Honeydew Snow Foam Cleanser (1 Gal) []  2020-1-18 21:34

    Junk - Form Cannon broke after only a few uses. Past return period and manufacture won't stand behind it, only wants to me another one. Save your and one of the a lot of other ones on Amazon that are cheaper.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_312 TORQ Professional Foam Cannon and Honeydew Snow Foam Cleanser (1 Gal) []  2020-1-18 21:34

    I was very excited to obtain this foam cannon and I was willing to spend the additional in hopes of receiving a decent product. I was happy with how the cannon performed but one day when I walked outside to pick up the bottle for the second time, I lifted the bottle and the top stayed on my microfiber towels. I then inspected what was going on and I see that the threads have snapped off in the top while just laying in a basket. I called chemical guys and they didn't even give me the time of day about a so I called Amazon and the guy was very helpful and just did a full replacement. So I received another and was sure to not leave the top threaded on while not using the cannon. After 4 uses, I went to use it yesterday and boom it's broken again while I was getting ready to tighten the top. So I have since gotten a full and am going to search a various brand bottle and I really don't help chemical guys anymore. They have no customer service! Amazon does however take care of their customers!

    0  


  • 0

    Useful review?

    Chemical Guys EQP_312 TORQ Professional Foam Cannon and Honeydew Snow Foam Cleanser (1 Gal) []  2020-1-18 21:34

    I want there was a method to give a NEGATIVE 5-STAR rating for this product. I bought this bottle and only after using it 3-4 times, the plastic cap detached from the rest of the bottle. Upon contacting the company (product was still under warranty), Chemical Guys sent me a replacement bottle, which was of such cheaply created plastic that the first time I used it with my foam canon attachment, the heat from the spray operation caused the plastic to expand and obtain stuck to the bottle. The bottle itself disintegrated into multiple bits (such is the crappy quality of their products), the true icing on the cake was an email from the company informing me "their management squad has determined that there was nothing wrong with the bottle and that I should be responsible for removing the plastic that is stuck to the foam cannon attachment".$100 down the drain and a pledge to never anything from this company again that has such a not good customer service experience. They can hold their crappy products to themselves.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_312 TORQ Professional Foam Cannon and Honeydew Snow Foam Cleanser (1 Gal) []  2020-1-18 21:34

    Wanted to love this but 100% disappointed, I expected more, will never this Brand again. Used weekly since in February with a 3200PSI pressure washer, and it does not “Foam” at all. Been on YouTube, read posts, tried to adjust (the limited adjustments available) on the cannon itself, tried different levels of their overly priced soap -all with the same e foam adjustment knob is plastic Fits over a brass nut. Very not good design as the plastic knob will strip/stretch over the nut after adjusting several times, which mine did after a 5 or 6 uses. The brass assembly that screws on to the top of the bottle is a quality piece, but when unscrewing from the bottle to refill, 1/2 the time the cap stays snug on the bottle and instead unscrews from the bottom of the cannon. Most recently, the threaded and sleeved opening of the plastic bottle (that for screws into the bottom of the cannon have broken off in the cannon. For this money, I would expect this to last. Save some and aggravation something else.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_312 TORQ Professional Foam Cannon and Honeydew Snow Foam Cleanser (1 Gal) []  2020-1-18 21:34

    I purchased this kit on 1/31/2017, the soaps are fine, I also purchased a couple of drying towels which work great. The foam cannon works fine, the bottle does not. The top of the bottle broke after about 5 uses. Unfortunately for me the 5th use was on 5/14/2017. I read the reviews about this event but thought it was just people over tightening the bottle. As a technician by trade I understand what needs gorilla strength and what does not its an eductor so an airtight seal is not necessary. I did not over tighten the bottle, the crack happened below the threads. It appears the bottle, when full of solution, can't help its own weight when hanging by the cannon.I contacted Chemical Guys and was told they have a 30 day warranty and this was an Amazon problem but they will be glad to me a fresh POS bottle for an on of $19.99, whatever. Method to stand behind your yourself a favor and by the foam cannon with amazing reviews, not the one with Chemical Guys logo on the bottle.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_312 TORQ Professional Foam Cannon and Honeydew Snow Foam Cleanser (1 Gal) []  2020-1-18 21:34

    To all who has these foam cannons these plastic bottles will NOT latest more than a few times of use! These bottles are becoming expensive to continuously only after a few uses. This is the third one I’ve had to buy. What this company needs to is a metal bottle to avoid the tops breaking off. I have seen they have brass tops but think about it? They are still attached to plastic. I would hope the company would reimburse me for the previous orders or send me a supply of these until they have a metal bottle that can replace these. If I could leave a zero for this I would and you really have no choice but to these unless you go to a various foam cannon. Maybe going back to washing old school is the method to go, sometimes doing things the original method is better?!

    0  


  • 0

    Useful review?

    Chemical Guys EQP_313 TORQ Professional Foam Cannon and Soap Kit (4 Items) []  2020-1-31 22:45

    Junk - Form Cannon broke after only a few uses. Past return period and manufacture won't stand behind it, only wants to me another one. Save your and one of the a lot of other ones on Amazon that are cheaper.

    0  


  • 0

    Useful review?

    Chemical Guys EQP320 1 Pack MTM PF22 Professional Foam Lance and Cannon []  2020-1-25 11:35

    First of all this foam lance/cannon is and does everything it is touted to do. I got a amazing foam on my vehicle that was a small over a week off of the showroom floor. There was some light dust on the vehicle (it's parked in a closed garage) so I foamed the vehicle down according to the online videos and washed and rinsed the vehicle afterwards. When drying the vehicle I still picked up the light dust on my white dry towel from spots that I missed. three more washes, I'm still trying to figure out what the need is for the foam since it doesn't seem to be able to loosen or support with even light dust film.I gave the seller 5 stars for their on time delivery and the fact that the foam cannon does work well creating a generous foam over the vehicle and the spray nozzle is adjustable as advertised.

    0  


  • 0

    Useful review?

    Chemical Guys EQP320 1 Pack MTM PF22 Professional Foam Lance and Cannon []  2020-1-25 11:35

     So I created a video comparing 5 most used foam guns out there. Video compares :1. Chemical Guys Torq foam blaster (requires no pressure washer)2. Twinkle star foam gun3. Matcc Foam Cannon 24. Chemical Guy professional Torq foam gun5. MTM Hydro (this product)In the video, all foam guns use the same soap. I diluted carpro’s restart 10to1 into a bottle and distributed it evenly across all foam emical Guys Foam Blaster: The worse effect was this chemical guys foam blaster. Obviously you can see why, there is no pressure washer and is direct from a garden hose. There is absolutely no foam and it’s $60 retail. Value/performance rating is 0/5, I would suggest spending a small additional on the cheapest pressure washer out there and using a foam gun for the money. Rating 1/5Twinkle Star foam cannon: this is the cheapest of all 5 for $15. It’s better then the foam blaster but it stands latest 2nd. Foam is very watery and comes off beautiful quickly. Only value has it going for it, so if you’re on a tight budget then you could obtain this (but look at next one for $5 more). Rating 2/5MATCC Foam Cannon 2: this foam cannon surprised me the most and gets my top vote! For $20 you can compare the results of what professional foam cannons can do. Value/performance create it rank 5/5! Only complaint I have is the hint was harder to adjust to wide pattern. (In the video it moved out of wide spray pattern). Rating 5/5Chemical Guys Professional Torq Foam Cannon: this is the $70 foam cannon by chemical guys. The quality of it is probably the nicest of all 5 but having using this right after the MATCC, I don’t see why you should spend $50 more on this foam cannon unless build quality is your top of your concern. Rating 4/5MTM Hydro: this is the professional go to foam gun. Almost every professional detailer I know uses this one and it should perform the best, but it wasn’t. For $90/$160 w/MTMs gun, it’s the most expensive foam cannon of all and possibly of any out there. The quality is 2nd to CGs Torq but in terms ofFoaming it doesn’t have much edge over MATCC or CG Torq. It’s definitely not worth the additional $70 more to foam 10% more. This gun also draws soap a lot faster so that may be why touching obtain more foam. Dislikes, the hint adjustment is very flimsy, it changes everytime you set it down. Rating 3/5

    0  


  • 0

    Useful review?

    Chemical Guys EQP320 1 Pack MTM PF22 Professional Foam Lance and Cannon []  2020-1-25 11:35

    Old versions. Doesn’t contain 1.1mm orifice.

    0  


  • 0

    Useful review?

    Chemical Guys EQP320 1 Pack MTM PF22 Professional Foam Lance and Cannon []  2020-1-25 11:35

    Amazing product I can’t see myself going back to Washing my vehicle the old method anymore. Haven’t tried any of the cheaper versions on amazon so I do t know what to compare it with but decided to just go with higher quality one and be done with it.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_313 TORQ Professional Foam Cannon and Soap Kit (4 Items) []  2020-1-31 22:45

    The soap is fantastic, however the plastic cannister is cheap. The threads completely broke off after only three uses. I would like a replacement Foam Cannon container, however the little window of time to replace this has passed. I've attempted to call Chemical Guys directly, and the phone just rings and goes back to main menu so I have no method of getting a keep of anyone. For $91.00, this is a rip-off.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_313 TORQ Professional Foam Cannon and Soap Kit (4 Items) []  2020-1-31 22:45

    Returned item. Does not have EQP_310 Torq on nozzle. It's genuineness is unknown to me. There are other stuff like the one sent to me for much less.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_313 TORQ Professional Foam Cannon and Soap Kit (4 Items) []  2020-1-31 22:45

    I couldn't be happier, it works exactly as advertised. Hooked it up to my 3100 psi pressure washer. Took roughly half an hour to rinse/wash/rinse my truck. I intentionally tried the no-touch way first, just to see what the results would be. Truck was only sort of dirty, basically just covered in light dirt & pollen. When I was done I'd say the truck was 95% clean, certainly enough to consider it a successful "spruce up". Took a small detail spray and microfiber cloth to the locations directly behind the wheels, and it was done.Didn't have any problem adjusting from wide fan to jet & back, and the coverage was just like in the videos. Amazing product. While it is a bit expensive (watch the prices, as of this writing it's $13 more expensive than when I bought it. Seems to fluctuate), deducting a star for that is beautiful silly. I knew how expensive it was when I bought it, so how can I complain?

    0  


  • 0

    Useful review?

    Chemical Guys EQP_313 TORQ Professional Foam Cannon and Soap Kit (4 Items) []  2020-1-31 22:45

    Wanted to love this but 100% disappointed, I expected more, will never this Brand again. Used weekly since in February with a 3200PSI pressure washer, and it does not “Foam” at all. Been on YouTube, read posts, tried to adjust (the limited adjustments available) on the cannon itself, tried different levels of their overly priced soap -all with the same e foam adjustment knob is plastic Fits over a brass nut. Very not good design as the plastic knob will strip/stretch over the nut after adjusting several times, which mine did after a 5 or 6 uses. The brass assembly that screws on to the top of the bottle is a quality piece, but when unscrewing from the bottle to refill, 1/2 the time the cap stays snug on the bottle and instead unscrews from the bottom of the cannon. Most recently, the threaded and sleeved opening of the plastic bottle (that for screws into the bottom of the cannon have broken off in the cannon. For this money, I would expect this to last. Save some and aggravation something else.

    0  


  • 0

    Useful review?

    Chemical Guys EQP320 1 Pack MTM PF22 Professional Foam Lance and Cannon []  2020-1-25 11:35

    Recently purchased the Chemical Guys Foam Cannon for use on two daily-driver vehicles. After viewing several videos online I hoped the cannon would produce a rich, clinging foam. Attached to an electric 2030psi pressure washer I am happy to report this things works even better than imagined! As a long time Griots Garage customer I did use their BOSS Foaming Surface Wash and Foaming Poly Gloss. I added 2 ounces of wash liquid to the cannon then filled the rest with water. This gave plenty of foam to very thoroughly cover a 4 door sedan and a mid-size SUV with loads of lather. A fast rinse with the pressue washer then repeated the process with sealant. In under 30 mins both cars looked as though I spent the afternoon hand-washing and polishing. Clean up was easy - just rinse out the reservoir, fill with clean water, and attach to the pressure washer for a fast rinse. This thing will revolutionize my vehicle care process!

    0  


  • 0

    Useful review?

    Chemical Guys EQP_313 TORQ Professional Foam Cannon and Soap Kit (4 Items) []  2020-1-31 22:45

    I was very excited to obtain this foam cannon and I was willing to spend the additional in hopes of receiving a decent product. I was happy with how the cannon performed but one day when I walked outside to pick up the bottle for the second time, I lifted the bottle and the top stayed on my microfiber towels. I then inspected what was going on and I see that the threads have snapped off in the top while just laying in a basket. I called chemical guys and they didn't even give me the time of day about a so I called Amazon and the guy was very helpful and just did a full replacement. So I received another and was sure to not leave the top threaded on while not using the cannon. After 4 uses, I went to use it yesterday and boom it's broken again while I was getting ready to tighten the top. So I have since gotten a full and am going to search a various brand bottle and I really don't help chemical guys anymore. They have no customer service! Amazon does however take care of their customers!

    0  


  • 0

    Useful review?

    Chemical Guys EQP320 1 Pack MTM PF22 Professional Foam Lance and Cannon []  2020-1-25 11:35

    I think MTM needs to improve on making the plastic bottle threads more refined and 's very simple to cross thread the bottle. Also improving the tightness of the spray nozzle so that it doesn't detract from your preferred setting.Other than that it's a really amazing foam cannon. Lays the shampoo/foam very evenly. Better than my Autobrite foam cannon.If you're using a lower entry level pressure washer rather than say a Kranzzle you may use more soap. That's really due to the gpm from the pressure washer.I'll still the PFM22 again due to its performance. There will be an make batter bottle coming out soon.Hopefully better threading and yes it will support stand up the foam cannon.I changed out my orifice to 1.1 as it came with 1.2. Suitable for my setup (Karcher K5 Premium). Only the Kranzzle and gas powered washers use 1.2 orifice

    0  


  • 0

    Useful review?

    Chemical Guys EQP320 1 Pack MTM PF22 Professional Foam Lance and Cannon []  2020-1-25 11:35

    Works amazing does it stopped up sometimes but could just be my well water also it will stop spraying foam sometimes and turn the knob alittle bit and it will begin back up

    0  


  • 0

    Useful review?

    Chemical Guys EQP320 1 Pack MTM PF22 Professional Foam Lance and Cannon []  2020-1-25 11:35

    I should have listened to others feedback more. This foam cannon is just not worth the price. You one for one-forth the cost that is 99% as good. This was even poor enough the fast attach for the pressure washer actually got jammed and I had to pry it off. Basically now I have to a fresh wand all because of a $2 part included with this over-priced cannon. Just 4 of any other one, you won't be disappointed.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_313 TORQ Professional Foam Cannon and Soap Kit (4 Items) []  2020-1-31 22:45

    ****Read****Product works 180% as intended. Exactly how Chemical Guys video represents it. Directions say to use 2-3 ounces of product per water container. I used about 3.5 ounces on 800mL out of 1,000. It's imperative you read the directions and use room temperature water to obtain amazing results. I build vehicles and detail them I was a skeptic and I must say I'm beyond impressed. I did my father-in-laws Q5 (black) without drying and it came out amazing! 5pm 80 degrees and in direct PORTANT!!!!!!!!I saw a lot of poor reviews about the bottle threads stripping out and leaking. Do yourself the favor and obtain a generic garden hose male/female fast release fitting for a garden hose gun. This will create each side have a fitting so you never need to remove it thus threads will never strip out. The hole for the fitting is just huge enough to feet the foam gun hose through it. Finally.... USE TEFLON TAPE FOR THE FITTINGS!!!!!!!!!! They go on rough without, once you place Teflon on they thread like l in all I'm beyond impressed with this product compared to related products and it's worth the price. I firmly believe that the negative ratings of "leaking" and "stripped threads" or "poor foam, broke first time" is from improper/neglected use. Below you can see the attachment I used from a garden hose that I spoke about above

    0  


  • 0

    Useful review?

    Chemical Guys EQP_313 TORQ Professional Foam Cannon and Soap Kit (4 Items) []  2020-1-31 22:45

    I purchased this kit on 1/31/2017, the soaps are fine, I also purchased a couple of drying towels which work great. The foam cannon works fine, the bottle does not. The top of the bottle broke after about 5 uses. Unfortunately for me the 5th use was on 5/14/2017. I read the reviews about this event but thought it was just people over tightening the bottle. As a technician by trade I understand what needs gorilla strength and what does not its an eductor so an airtight seal is not necessary. I did not over tighten the bottle, the crack happened below the threads. It appears the bottle, when full of solution, can't help its own weight when hanging by the cannon.I contacted Chemical Guys and was told they have a 30 day warranty and this was an Amazon problem but they will be glad to me a fresh POS bottle for an on of $19.99, whatever. Method to stand behind your yourself a favor and by the foam cannon with amazing reviews, not the one with Chemical Guys logo on the bottle.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_313 TORQ Professional Foam Cannon and Soap Kit (4 Items) []  2020-1-31 22:45

    I want there was a method to give a NEGATIVE 5-STAR rating for this product. I bought this bottle and only after using it 3-4 times, the plastic cap detached from the rest of the bottle. Upon contacting the company (product was still under warranty), Chemical Guys sent me a replacement bottle, which was of such cheaply created plastic that the first time I used it with my foam canon attachment, the heat from the spray operation caused the plastic to expand and obtain stuck to the bottle. The bottle itself disintegrated into multiple bits (such is the crappy quality of their products), the true icing on the cake was an email from the company informing me "their management squad has determined that there was nothing wrong with the bottle and that I should be responsible for removing the plastic that is stuck to the foam cannon attachment".$100 down the drain and a pledge to never anything from this company again that has such a not good customer service experience. They can hold their crappy products to themselves.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_313 TORQ Professional Foam Cannon and Soap Kit (4 Items) []  2020-1-31 22:45

    To all who has these foam cannons these plastic bottles will NOT latest more than a few times of use! These bottles are becoming expensive to continuously only after a few uses. This is the third one I’ve had to buy. What this company needs to is a metal bottle to avoid the tops breaking off. I have seen they have brass tops but think about it? They are still attached to plastic. I would hope the company would reimburse me for the previous orders or send me a supply of these until they have a metal bottle that can replace these. If I could leave a zero for this I would and you really have no choice but to these unless you go to a various foam cannon. Maybe going back to washing old school is the method to go, sometimes doing things the original method is better?!

    0  


  • 0

    Useful review?

    Chemical Guys EQP320 1 Pack MTM PF22 Professional Foam Lance and Cannon []  2020-1-25 11:35

    I bought this foam cannon about a week ago. This items works great. But the is just insane. You can obtain the same foam cannon for about $15 dollars! Terrible!

    0  


  • 0

    Useful review?

    Chemical Guys EQP320 1 Pack MTM PF22 Professional Foam Lance and Cannon []  2020-1-25 11:35

    Allow me begin by saying that I’ve had a Tri Nova foam cannon for 2 years so I’m familiar with how they work. I’ve always wanted a PF22 but didn’t wish to $ly went on for $68 so I snatched one up. Out of the box, I was already disappointed. The opening of the bottle is super little compared to the Tri Nova. Then, when I tried to screw the bottle onto the nozzle, got cross threaded (I was being very easy). The Tri Nova threads are so much bigger and thicker, I’ve never cross threaded them.Hooked it up to my Karcher 2400 psi pressure washer and.............nothing. Water just dribbled out. Had to break out my huge 4000 psi Dewalt. Some people have talked about needing a smaller orifice to create it work on smaller machines but specs list this as compatible with washers starting at 1100 psi (and no, smaller orifice is NOT included with this unit).Maybe I just got a defective one but don’t think so. Finally got it working with my bigger washer but noticed suds weren’t as thick as the Tri Nova produces (had knob turned to maximum). Broke out my Tri Nova, poured the same solution in it and voila, nice thick ted wondering at this point why I bought the PF22. Ended up returning it. Even if the Tri Nova broke tomorrow, I would another one, especially for 1/3 the price. I wanted to love the PF22, I really did. It’s really cool looking but at the end of the day, it just didn’t do the job. Be careful if you have a smaller pressure washer, may not work for you.

    0  


  • 0

    Useful review?

    Chemical Guys EQP317 Torq Professional Foam Cannon and Glossworkz Auto Wash (1 Gal), 128 fl. oz, 1 Pack []  2020-4-19 18:39

    I purchased this kit on 1/31/2017, the soaps are fine, I also purchased a couple of drying towels which work great. The foam cannon works fine, the bottle does not. The top of the bottle broke after about 5 uses. Unfortunately for me the 5th use was on 5/14/2017. I read the reviews about this event but thought it was just people over tightening the bottle. As a technician by trade I understand what needs gorilla strength and what does not its an eductor so an airtight seal is not necessary. I did not over tighten the bottle, the crack happened below the threads. It appears the bottle, when full of solution, can't help its own weight when hanging by the cannon.I contacted Chemical Guys and was told they have a 30 day warranty and this was an Amazon problem but they will be glad to me a fresh POS bottle for an on of $19.99, whatever. Method to stand behind your yourself a favor and by the foam cannon with amazing reviews, not the one with Chemical Guys logo on the bottle.

    0  


  • 0

    Useful review?

    Chemical Guys EQP317 Torq Professional Foam Cannon and Glossworkz Auto Wash (1 Gal), 128 fl. oz, 1 Pack []  2020-4-19 18:39

    To all who has these foam cannons these plastic bottles will NOT latest more than a few times of use! These bottles are becoming expensive to continuously only after a few uses. This is the third one I’ve had to buy. What this company needs to is a metal bottle to avoid the tops breaking off. I have seen they have brass tops but think about it? They are still attached to plastic. I would hope the company would reimburse me for the previous orders or send me a supply of these until they have a metal bottle that can replace these. If I could leave a zero for this I would and you really have no choice but to these unless you go to a various foam cannon. Maybe going back to washing old school is the method to go, sometimes doing things the original method is better?!

    0  


  • 0

    Useful review?

    Chemical Guys EQP318 Torq Professional Foam Cannon and Hybrid V7 Auto Wash (1 Gal), 128 fl. oz. []  2020-1-29 10:59

    I purchased this kit on 1/31/2017, the soaps are fine, I also purchased a couple of drying towels which work great. The foam cannon works fine, the bottle does not. The top of the bottle broke after about 5 uses. Unfortunately for me the 5th use was on 5/14/2017. I read the reviews about this event but thought it was just people over tightening the bottle. As a technician by trade I understand what needs gorilla strength and what does not its an eductor so an airtight seal is not necessary. I did not over tighten the bottle, the crack happened below the threads. It appears the bottle, when full of solution, can't help its own weight when hanging by the cannon.I contacted Chemical Guys and was told they have a 30 day warranty and this was an Amazon problem but they will be glad to me a fresh POS bottle for an on of $19.99, whatever. Method to stand behind your yourself a favor and by the foam cannon with amazing reviews, not the one with Chemical Guys logo on the bottle.

    0  


  • 0

    Useful review?

    Chemical Guys EQP318 Torq Professional Foam Cannon and Hybrid V7 Auto Wash (1 Gal), 128 fl. oz. []  2020-1-29 10:59

    To all who has these foam cannons these plastic bottles will NOT latest more than a few times of use! These bottles are becoming expensive to continuously only after a few uses. This is the third one I’ve had to buy. What this company needs to is a metal bottle to avoid the tops breaking off. I have seen they have brass tops but think about it? They are still attached to plastic. I would hope the company would reimburse me for the previous orders or send me a supply of these until they have a metal bottle that can replace these. If I could leave a zero for this I would and you really have no choice but to these unless you go to a various foam cannon. Maybe going back to washing old school is the method to go, sometimes doing things the original method is better?!

    0  


  • 0

    Useful review?

    Chemical Guys EQP318 Torq Professional Foam Cannon and Hybrid V7 Auto Wash (1 Gal), 128 fl. oz. []  2020-1-29 10:59

    Wanted to love this but 100% disappointed, I expected more, will never this Brand again. Used weekly since in February with a 3200PSI pressure washer, and it does not “Foam” at all. Been on YouTube, read posts, tried to adjust (the limited adjustments available) on the cannon itself, tried different levels of their overly priced soap -all with the same e foam adjustment knob is plastic Fits over a brass nut. Very not good design as the plastic knob will strip/stretch over the nut after adjusting several times, which mine did after a 5 or 6 uses. The brass assembly that screws on to the top of the bottle is a quality piece, but when unscrewing from the bottle to refill, 1/2 the time the cap stays snug on the bottle and instead unscrews from the bottom of the cannon. Most recently, the threaded and sleeved opening of the plastic bottle (that for screws into the bottom of the cannon have broken off in the cannon. For this money, I would expect this to last. Save some and aggravation something else.

    0  


  • 0

    Useful review?

    Chemical Guys EQP318 Torq Professional Foam Cannon and Hybrid V7 Auto Wash (1 Gal), 128 fl. oz. []  2020-1-29 10:59

    Returned item. Does not have EQP_310 Torq on nozzle. It's genuineness is unknown to me. There are other stuff like the one sent to me for much less.

    0  


  • 0

    Useful review?

    Chemical Guys EQP317 Torq Professional Foam Cannon and Glossworkz Auto Wash (1 Gal), 128 fl. oz, 1 Pack []  2020-4-19 18:39

    The soap is fantastic, however the plastic cannister is cheap. The threads completely broke off after only three uses. I would like a replacement Foam Cannon container, however the little window of time to replace this has passed. I've attempted to call Chemical Guys directly, and the phone just rings and goes back to main menu so I have no method of getting a keep of anyone. For $91.00, this is a rip-off.

    0  


  • 0

    Useful review?

    Chemical Guys EQP317 Torq Professional Foam Cannon and Glossworkz Auto Wash (1 Gal), 128 fl. oz, 1 Pack []  2020-4-19 18:39

    I was very excited to obtain this foam cannon and I was willing to spend the additional in hopes of receiving a decent product. I was happy with how the cannon performed but one day when I walked outside to pick up the bottle for the second time, I lifted the bottle and the top stayed on my microfiber towels. I then inspected what was going on and I see that the threads have snapped off in the top while just laying in a basket. I called chemical guys and they didn't even give me the time of day about a so I called Amazon and the guy was very helpful and just did a full replacement. So I received another and was sure to not leave the top threaded on while not using the cannon. After 4 uses, I went to use it yesterday and boom it's broken again while I was getting ready to tighten the top. So I have since gotten a full and am going to search a various brand bottle and I really don't help chemical guys anymore. They have no customer service! Amazon does however take care of their customers!

    0  


  • 0

    Useful review?

    Chemical Guys EQP318 Torq Professional Foam Cannon and Hybrid V7 Auto Wash (1 Gal), 128 fl. oz. []  2020-1-29 10:59

    ****Read****Product works 180% as intended. Exactly how Chemical Guys video represents it. Directions say to use 2-3 ounces of product per water container. I used about 3.5 ounces on 800mL out of 1,000. It's imperative you read the directions and use room temperature water to obtain amazing results. I build vehicles and detail them I was a skeptic and I must say I'm beyond impressed. I did my father-in-laws Q5 (black) without drying and it came out amazing! 5pm 80 degrees and in direct PORTANT!!!!!!!!I saw a lot of poor reviews about the bottle threads stripping out and leaking. Do yourself the favor and obtain a generic garden hose male/female fast release fitting for a garden hose gun. This will create each side have a fitting so you never need to remove it thus threads will never strip out. The hole for the fitting is just huge enough to feet the foam gun hose through it. Finally.... USE TEFLON TAPE FOR THE FITTINGS!!!!!!!!!! They go on rough without, once you place Teflon on they thread like l in all I'm beyond impressed with this product compared to related products and it's worth the price. I firmly believe that the negative ratings of "leaking" and "stripped threads" or "poor foam, broke first time" is from improper/neglected use. Below you can see the attachment I used from a garden hose that I spoke about above

    0  


  • 0

    Useful review?

    Chemical Guys EQP318 Torq Professional Foam Cannon and Hybrid V7 Auto Wash (1 Gal), 128 fl. oz. []  2020-1-29 10:59

    I couldn't be happier, it works exactly as advertised. Hooked it up to my 3100 psi pressure washer. Took roughly half an hour to rinse/wash/rinse my truck. I intentionally tried the no-touch way first, just to see what the results would be. Truck was only sort of dirty, basically just covered in light dirt & pollen. When I was done I'd say the truck was 95% clean, certainly enough to consider it a successful "spruce up". Took a small detail spray and microfiber cloth to the locations directly behind the wheels, and it was done.Didn't have any problem adjusting from wide fan to jet & back, and the coverage was just like in the videos. Amazing product. While it is a bit expensive (watch the prices, as of this writing it's $13 more expensive than when I bought it. Seems to fluctuate), deducting a star for that is beautiful silly. I knew how expensive it was when I bought it, so how can I complain?

    0  


  • 0

    Useful review?

    Chemical Guys EQP317 Torq Professional Foam Cannon and Glossworkz Auto Wash (1 Gal), 128 fl. oz, 1 Pack []  2020-4-19 18:39

    Junk - Form Cannon broke after only a few uses. Past return period and manufacture won't stand behind it, only wants to me another one. Save your and one of the a lot of other ones on Amazon that are cheaper.

    0  


  • 0

    Useful review?

    Chemical Guys EQP317 Torq Professional Foam Cannon and Glossworkz Auto Wash (1 Gal), 128 fl. oz, 1 Pack []  2020-4-19 18:39

    I couldn't be happier, it works exactly as advertised. Hooked it up to my 3100 psi pressure washer. Took roughly half an hour to rinse/wash/rinse my truck. I intentionally tried the no-touch way first, just to see what the results would be. Truck was only sort of dirty, basically just covered in light dirt & pollen. When I was done I'd say the truck was 95% clean, certainly enough to consider it a successful "spruce up". Took a small detail spray and microfiber cloth to the locations directly behind the wheels, and it was done.Didn't have any problem adjusting from wide fan to jet & back, and the coverage was just like in the videos. Amazing product. While it is a bit expensive (watch the prices, as of this writing it's $13 more expensive than when I bought it. Seems to fluctuate), deducting a star for that is beautiful silly. I knew how expensive it was when I bought it, so how can I complain?

    0  


  • 0

    Useful review?

    Chemical Guys EQP317 Torq Professional Foam Cannon and Glossworkz Auto Wash (1 Gal), 128 fl. oz, 1 Pack []  2020-4-19 18:39

    Wanted to love this but 100% disappointed, I expected more, will never this Brand again. Used weekly since in February with a 3200PSI pressure washer, and it does not “Foam” at all. Been on YouTube, read posts, tried to adjust (the limited adjustments available) on the cannon itself, tried different levels of their overly priced soap -all with the same e foam adjustment knob is plastic Fits over a brass nut. Very not good design as the plastic knob will strip/stretch over the nut after adjusting several times, which mine did after a 5 or 6 uses. The brass assembly that screws on to the top of the bottle is a quality piece, but when unscrewing from the bottle to refill, 1/2 the time the cap stays snug on the bottle and instead unscrews from the bottom of the cannon. Most recently, the threaded and sleeved opening of the plastic bottle (that for screws into the bottom of the cannon have broken off in the cannon. For this money, I would expect this to last. Save some and aggravation something else.

    0  


  • 0

    Useful review?

    Chemical Guys EQP317 Torq Professional Foam Cannon and Glossworkz Auto Wash (1 Gal), 128 fl. oz, 1 Pack []  2020-4-19 18:39

    I want there was a method to give a NEGATIVE 5-STAR rating for this product. I bought this bottle and only after using it 3-4 times, the plastic cap detached from the rest of the bottle. Upon contacting the company (product was still under warranty), Chemical Guys sent me a replacement bottle, which was of such cheaply created plastic that the first time I used it with my foam canon attachment, the heat from the spray operation caused the plastic to expand and obtain stuck to the bottle. The bottle itself disintegrated into multiple bits (such is the crappy quality of their products), the true icing on the cake was an email from the company informing me "their management squad has determined that there was nothing wrong with the bottle and that I should be responsible for removing the plastic that is stuck to the foam cannon attachment".$100 down the drain and a pledge to never anything from this company again that has such a not good customer service experience. They can hold their crappy products to themselves.

    0  


  • 0

    Useful review?

    Chemical Guys EQP318 Torq Professional Foam Cannon and Hybrid V7 Auto Wash (1 Gal), 128 fl. oz. []  2020-1-29 10:59

    I was very excited to obtain this foam cannon and I was willing to spend the additional in hopes of receiving a decent product. I was happy with how the cannon performed but one day when I walked outside to pick up the bottle for the second time, I lifted the bottle and the top stayed on my microfiber towels. I then inspected what was going on and I see that the threads have snapped off in the top while just laying in a basket. I called chemical guys and they didn't even give me the time of day about a so I called Amazon and the guy was very helpful and just did a full replacement. So I received another and was sure to not leave the top threaded on while not using the cannon. After 4 uses, I went to use it yesterday and boom it's broken again while I was getting ready to tighten the top. So I have since gotten a full and am going to search a various brand bottle and I really don't help chemical guys anymore. They have no customer service! Amazon does however take care of their customers!

    0  


  • 0

    Useful review?

    Chemical Guys EQP318 Torq Professional Foam Cannon and Hybrid V7 Auto Wash (1 Gal), 128 fl. oz. []  2020-1-29 10:59

    I want there was a method to give a NEGATIVE 5-STAR rating for this product. I bought this bottle and only after using it 3-4 times, the plastic cap detached from the rest of the bottle. Upon contacting the company (product was still under warranty), Chemical Guys sent me a replacement bottle, which was of such cheaply created plastic that the first time I used it with my foam canon attachment, the heat from the spray operation caused the plastic to expand and obtain stuck to the bottle. The bottle itself disintegrated into multiple bits (such is the crappy quality of their products), the true icing on the cake was an email from the company informing me "their management squad has determined that there was nothing wrong with the bottle and that I should be responsible for removing the plastic that is stuck to the foam cannon attachment".$100 down the drain and a pledge to never anything from this company again that has such a not good customer service experience. They can hold their crappy products to themselves.

    0  


  • 0

    Useful review?

    Chemical Guys EQP318 Torq Professional Foam Cannon and Hybrid V7 Auto Wash (1 Gal), 128 fl. oz. []  2020-1-29 10:59

    The soap is fantastic, however the plastic cannister is cheap. The threads completely broke off after only three uses. I would like a replacement Foam Cannon container, however the little window of time to replace this has passed. I've attempted to call Chemical Guys directly, and the phone just rings and goes back to main menu so I have no method of getting a keep of anyone. For $91.00, this is a rip-off.

    0  


  • 0

    Useful review?

    Chemical Guys EQP318 Torq Professional Foam Cannon and Hybrid V7 Auto Wash (1 Gal), 128 fl. oz. []  2020-1-29 10:59

    Junk - Form Cannon broke after only a few uses. Past return period and manufacture won't stand behind it, only wants to me another one. Save your and one of the a lot of other ones on Amazon that are cheaper.

    0  


  • 0

    Useful review?

    Chemical Guys EQP317 Torq Professional Foam Cannon and Glossworkz Auto Wash (1 Gal), 128 fl. oz, 1 Pack []  2020-4-19 18:39

    ****Read****Product works 180% as intended. Exactly how Chemical Guys video represents it. Directions say to use 2-3 ounces of product per water container. I used about 3.5 ounces on 800mL out of 1,000. It's imperative you read the directions and use room temperature water to obtain amazing results. I build vehicles and detail them I was a skeptic and I must say I'm beyond impressed. I did my father-in-laws Q5 (black) without drying and it came out amazing! 5pm 80 degrees and in direct PORTANT!!!!!!!!I saw a lot of poor reviews about the bottle threads stripping out and leaking. Do yourself the favor and obtain a generic garden hose male/female fast release fitting for a garden hose gun. This will create each side have a fitting so you never need to remove it thus threads will never strip out. The hole for the fitting is just huge enough to feet the foam gun hose through it. Finally.... USE TEFLON TAPE FOR THE FITTINGS!!!!!!!!!! They go on rough without, once you place Teflon on they thread like l in all I'm beyond impressed with this product compared to related products and it's worth the price. I firmly believe that the negative ratings of "leaking" and "stripped threads" or "poor foam, broke first time" is from improper/neglected use. Below you can see the attachment I used from a garden hose that I spoke about above

    0  


  • 0

    Useful review?

    Chemical Guys EQP317 Torq Professional Foam Cannon and Glossworkz Auto Wash (1 Gal), 128 fl. oz, 1 Pack []  2020-4-19 18:39

    Returned item. Does not have EQP_310 Torq on nozzle. It's genuineness is unknown to me. There are other stuff like the one sent to me for much less.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310_B TORQ Foam Cannon Replacement Bottle []  2020-1-14 19:47

    Junk - Form Cannon broke after only a few uses. Past return period and manufacture won't stand behind it, only wants to me another one. Save your and one of the a lot of other ones on Amazon that are cheaper.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310_B TORQ Foam Cannon Replacement Bottle []  2020-1-14 19:47

    Wanted to love this but 100% disappointed, I expected more, will never this Brand again. Used weekly since in February with a 3200PSI pressure washer, and it does not “Foam” at all. Been on YouTube, read posts, tried to adjust (the limited adjustments available) on the cannon itself, tried different levels of their overly priced soap -all with the same e foam adjustment knob is plastic Fits over a brass nut. Very not good design as the plastic knob will strip/stretch over the nut after adjusting several times, which mine did after a 5 or 6 uses. The brass assembly that screws on to the top of the bottle is a quality piece, but when unscrewing from the bottle to refill, 1/2 the time the cap stays snug on the bottle and instead unscrews from the bottom of the cannon. Most recently, the threaded and sleeved opening of the plastic bottle (that for screws into the bottom of the cannon have broken off in the cannon. For this money, I would expect this to last. Save some and aggravation something else.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310_B TORQ Foam Cannon Replacement Bottle []  2020-1-14 19:47

    To all who has these foam cannons these plastic bottles will NOT latest more than a few times of use! These bottles are becoming expensive to continuously only after a few uses. This is the third one I’ve had to buy. What this company needs to is a metal bottle to avoid the tops breaking off. I have seen they have brass tops but think about it? They are still attached to plastic. I would hope the company would reimburse me for the previous orders or send me a supply of these until they have a metal bottle that can replace these. If I could leave a zero for this I would and you really have no choice but to these unless you go to a various foam cannon. Maybe going back to washing old school is the method to go, sometimes doing things the original method is better?!

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310_B TORQ Foam Cannon Replacement Bottle []  2020-1-14 19:47

    The soap is fantastic, however the plastic cannister is cheap. The threads completely broke off after only three uses. I would like a replacement Foam Cannon container, however the little window of time to replace this has passed. I've attempted to call Chemical Guys directly, and the phone just rings and goes back to main menu so I have no method of getting a keep of anyone. For $91.00, this is a rip-off.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310_B TORQ Foam Cannon Replacement Bottle []  2020-1-14 19:47

    Returned item. Does not have EQP_310 Torq on nozzle. It's genuineness is unknown to me. There are other stuff like the one sent to me for much less.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310_B TORQ Foam Cannon Replacement Bottle []  2020-1-14 19:47

    I purchased this kit on 1/31/2017, the soaps are fine, I also purchased a couple of drying towels which work great. The foam cannon works fine, the bottle does not. The top of the bottle broke after about 5 uses. Unfortunately for me the 5th use was on 5/14/2017. I read the reviews about this event but thought it was just people over tightening the bottle. As a technician by trade I understand what needs gorilla strength and what does not its an eductor so an airtight seal is not necessary. I did not over tighten the bottle, the crack happened below the threads. It appears the bottle, when full of solution, can't help its own weight when hanging by the cannon.I contacted Chemical Guys and was told they have a 30 day warranty and this was an Amazon problem but they will be glad to me a fresh POS bottle for an on of $19.99, whatever. Method to stand behind your yourself a favor and by the foam cannon with amazing reviews, not the one with Chemical Guys logo on the bottle.

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310_B TORQ Foam Cannon Replacement Bottle []  2020-1-14 19:47

    I couldn't be happier, it works exactly as advertised. Hooked it up to my 3100 psi pressure washer. Took roughly half an hour to rinse/wash/rinse my truck. I intentionally tried the no-touch way first, just to see what the results would be. Truck was only sort of dirty, basically just covered in light dirt & pollen. When I was done I'd say the truck was 95% clean, certainly enough to consider it a successful "spruce up". Took a small detail spray and microfiber cloth to the locations directly behind the wheels, and it was done.Didn't have any problem adjusting from wide fan to jet & back, and the coverage was just like in the videos. Amazing product. While it is a bit expensive (watch the prices, as of this writing it's $13 more expensive than when I bought it. Seems to fluctuate), deducting a star for that is beautiful silly. I knew how expensive it was when I bought it, so how can I complain?

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310_B TORQ Foam Cannon Replacement Bottle []  2020-1-14 19:47

    ****Read****Product works 180% as intended. Exactly how Chemical Guys video represents it. Directions say to use 2-3 ounces of product per water container. I used about 3.5 ounces on 800mL out of 1,000. It's imperative you read the directions and use room temperature water to obtain amazing results. I build vehicles and detail them I was a skeptic and I must say I'm beyond impressed. I did my father-in-laws Q5 (black) without drying and it came out amazing! 5pm 80 degrees and in direct PORTANT!!!!!!!!I saw a lot of poor reviews about the bottle threads stripping out and leaking. Do yourself the favor and obtain a generic garden hose male/female fast release fitting for a garden hose gun. This will create each side have a fitting so you never need to remove it thus threads will never strip out. The hole for the fitting is just huge enough to feet the foam gun hose through it. Finally.... USE TEFLON TAPE FOR THE FITTINGS!!!!!!!!!! They go on rough without, once you place Teflon on they thread like l in all I'm beyond impressed with this product compared to related products and it's worth the price. I firmly believe that the negative ratings of "leaking" and "stripped threads" or "poor foam, broke first time" is from improper/neglected use. Below you can see the attachment I used from a garden hose that I spoke about above

    0  


  • 0

    Useful review?

    Chemical Guys EQP_310_B TORQ Foam Cannon Replacement Bottle []  2020-1-14 19:47

    I want there was a method to give a NEGATIVE 5-STAR rating for this product. I bought this bottle and only after using it 3-4 times, the plastic cap detached from the rest of the bottle. Upon contacting the company (product was still under warranty), Chemical Guys sent me a replacement bottle, which was of such cheaply created plastic that the first time I used it with my foam canon attachment, the heat from the spray operation caused the plastic to expand and obtain stuck to the bottle. The bottle itself disintegrated into multiple bits (such is the crappy quality of their products), the true icing on the cake was an email from the company informing me "their management squad has determined that there was nothing wrong with the bottle and that I should be responsible for removing the plastic that is stuck to the foam cannon attachment".$100 down the drain and a pledge to never anything from this company again that has such a not good customer service experience. They can hold their crappy products to themselves.

    0  



    Search Cloud

    About us

    Use our product reviews finder and generate tons of ratings & opinions on any item, shop product or service. Search, read and publish reviews for brands, TV shows, ebooks, gadgets, video games, meals, music, household items or movies. Would you like to rate recently purchased thing? Go ahead! Express satisfaction or sadness, describe own experience & identify strengths and weaknesses of the product. Write short or detailed review with a few clicks.

    Community

    Publish review of any item you find here, registration is not required
    Share own experience, point out the pros and cons, warn or recommend
    Search for opinions on any item, product or service, read tons of reviews

    Contact

    www.add-reviews.com

    Use contact form to reach us or write a message via email:

    [email protected]

    Describe your problem, share ideas or report a bug on the site.

    https://add-reviews.com/
    0856-458-386