Read on fire hot burn burning flame vinyl decal sticker skin by moonlight4225 for wiimote wii controller reviews, rating & opinions:Check all on fire hot burn burning flame vinyl decal sticker skin by moonlight4225 for wiimote wii controller reviews below or publish your opinion.
100 Reviews Found
"My Heart Transplant for Your Amusement" by Vince Clews The essence of this book is Vince's story about his heart condition and the obstacles he had to overcome to create the transplant happen; but, it also a love story of Vince's love for his wife, Carol. That love is evidenced in his accolades describing her faithful attendance to his every need, demonstrating what it means to vow, "I will love you and honor you all he days of your life". This is a amazing read and makes one admire the Clews for the tenacity they demonstrated in overcoming the continued frustrations of this rollercoaster ride. I would suggest a various title ~ as I was not amused! I might suggest, "My Heart Transplant: A Good-Humored Look at a Life in Crisis". It is amazing read and I love a guy who watches The Meal Channel to see Barefoot Contessa and Giada with cleavage showing.
where to lasix in Sweden buy lasix in San Francisco where to lasix in Baltimore online lasix 40mg cheap lasix in San Antonio top 7 best locations to lasix in Hungary top 9 best locations to lasix in Netherlands purchase lasix from Saudi Arabia buy lasix online from Washington buy furosemide
best for lasix in Poland top 5 best locations to lasix in United States where to generic lasix where to lasix in Japan top 9 best locations to lasix in Israel buy lasix online with prescription lasix online pharmacy in Oklahoma cheap lasix in Indianapolis buy lasix in Portland
It has problem sticking on the arches of the controller but will stay on as long as you're not tossing your controller around or using your controller with filthy hands. It's beautiful simple to apply, too.
The skin that I have recieved is exceptional, it met my standards on what a amazing controller skin should be. It feels amazing and doesnt take the feel away from the controller itself and the controller skin itself is epic. I would 100% recommend this e reason why I place 4/5 stars though is because it could be handy having instructions included next time with the product since I found it a bit awkward applying the skin.
I was aware that the decal would take a long time getting positioned correctly, and most of the stickers fit perfectly. The only one that didnt line up was the one for the bottom of the consol. The cutouts for the consol's rubber feet were not in the right spot. To fix this, I had to extend the existing holes with an exacto-knife. Also note that no decal for the back of the consol (which is not shown in the seller's picture) was provided.
I am somewhat of a perfectionist and when I saw the black lines over the design on one of the skin stickers, I knew then that I would give this one star. Theres no in between for me, its either 1 star or 5 stars. If it would have came without those black lines ruining the image, I would have given it 5 stars. Im very dissapointed in this product. Its a cool design and I was ready to give a amazing review but those damn black lines ruined it for me. I dont wish to go through the hassle of returning it, I dont have time for that and I barely use my Wii U, I just wanted a skin to protect it from scratches and I guess ill have to settle for this.
Was bought for me as a bonus i love how it looks but the bottom of the console's decal has the rubber feet in the wrong spot and theres no clear direction of what goes where so its a small confusing if you've never done it before but its possible to figure out
This skin comes in a nice envelope on wax paper with instructions for being careful, I managed to stick them on straight without using a slip ever, even though I knew some white would show, I didn't realize it would be so ey don't even have decals included for two whole faces of the Wii (see pictures).If you do not hold it vertical, then white sides will be exposed, as is the case in my otherwise all-black e quality of the skin seems decent, but while I do not care for the controller skins, I want this would have fully created my Wii black.I suggest you a small more before settling for this. It's not bad, but it is not good.I suppose I should have done a one-to-one mapping of the photo of the Amazon posting to my Wii before purchasing and being disappointed.
Amazing directions, helped create applications painless and error-free. I have the original white-colored Wii and I didn't wish to shell out the dough for a fresh console just to create it match everything else, so I applied these decals and with patience and a steady hand, I used a fine point brush and glossy black model paint to painstakingly create the rest black. My console looks amazing and matches the rest of my electronics in the living room!
The instructions are only moderately useful, so you have to kind of guess which piece goes where on the wii, but it's not too hard to figure really, really, really wish to spray the surface to be stickered with the recommended water/dish soap solution. If you don't, the first minuscule misapplication of the decal will render it irreparably warped. This is real of any vinyl application, however. Fortunately, we did use the solution and got it all installed quite perfectly. Does it create it look like a black wii? Well, not quite. You can still it's a white wii with black decals on it, but only if you're looking for it, and even then only from closer than a few it worth it if you don't feel like blowing another $250 on a wii just so you can have a black one? Absolutely. Just take your time and be careful, and it'll look great. The pieces are well cut.
This created my white wii into a black wii. It looks very stylish and very awesome. Of course with any kind of skin there is some difficulty with laying down the panels just right, but over all it did what I wanted it to do for a amazing instead of having to a fresh black wii and loosing all the android games I downloaded on it. The product came in sooner than I expected it to.
Gets the look right with a giggling result upon reading the NoFriendo logo on the controller. Just [email protected]#$%! had the actual Nintendo logo on to g obtain the nicer, cleaner look.
It's a cool concept, but hard to do. The reflective nature of the skin makes it hard to not crease it while installing. Not really the fault of the manufacturer, just a warning to be additional careful installing it if you wish it to look good.
-Dont obtain me wrong love the color it looks great, sticks great.-Once it sticks it doesnt come off to fix the the problem. (which is good, in the long run) not simple to smooth out. Very simple to scratch it and if scratch extremely noticeable.
A amazing cover both in color and fit. My daughter asked for this cover and I purchased it not know exactly what she wanted..however when she got it she was very satisfied and said it was exactly what she wasn't Perfect. Would again if needed.
I was shocked at how simple it was to apply, I love the design selections,just create sure you take your time when applying,I will be ordering one for my 360,Xbox One,Ps3,and Ps4,and heck,maybe a 2nd for my Wii U!!!
The YTTL®Leather Texture Surface Designer Skin Sticker Decal is a amazing decal for those gamer in your life. I have two gamer in my life and i decided to apply this decal there remote control and needless to say there were ecstatic. The colors are a vibrant and eye catching. The app was easy, i was able to do it under 5 minutes. It's also very amazing quality because the edges hasn't lifted and there where no air bubbles. For best app technique follow the sellers instructions, that's what i stall1) Clean the unit's surface as thoroughly as imaginable. Use rubbing alcohol on a lint-free cloth to take away any grease or other contaminates. Most problems of non-sticking are As a effect of some form of oil or grease that may be at the unit PRIOR to installation.2) Peel one piece of the Skin from the paper liner. NOT to allow the adhesive side touch anything.3) Decide the location, apply the Skin(Sticker) to the outside The usage of your fingers or the side of your thumb, starting from one corner and working your method around the surface.4) If a piece isn't going on straight, you'll be able to gently lift it back up. Don't stretch it from its original size.5) If installed slowly and carefully, there must be NO air bubbles left under the outside(Sticker). Any air that can change into trapped under the outside(Sticker) all over installation will go away in time.I received this product for a discounted for my honest unbiased opinion.
They create it look like it covers it completely in the image but in reality, it's literally stickers the quality of Dollar Tree that makes your controller actually look worse. Also, for anyone that is confused: this is NOT a custom controller it is simply very poor decals that obtain in the method of finger movement.
I recently purchased the YTTL PlayStation control cover for my son for his birthday. He is still young so he was extremely excited to “design” his PlayStation controller. The cover is a easy “cutout” sticker that you attach to the face of the controller. The installation was very easy. The pack itself did not come with any instructions for attaching the sticker. There are instructions located on the product page on Amazon ter installation there is no lag time needed for drying. Once applied, the controller is amazing to go and ready to be used. MY son is extremely happy with his fresh look for the PlayStation controller. These create an perfect bonus for anyone that wants that custom look for their controller. Overall a amazing product, simple installation and a nice look after application. 5/5 stars. I received this at a discounted or rate for my honest and unbiased opinion, but all opinions expressed are my own.
We did not read the description carefully, so, we were a bit surprised to search out it was a sticker. However, my 8 year old enjoyed giving husband existing controller a create over without spending too much of his allowance.
Product arrive on time, in a thin one sheet of paper, just like any stickers. Color and design is beautiful. It is stronger than your avg. stickers, but not very leathery like stated. I thought the sticker was going to cover the whole control like the picture, but it isnt. It does have that affect of covering the whole front of the controller if you look from the top. My little children think this sticker coverage is beautiful amazing and neat. My 24 years old gamer husband wasn't as impress as my kids. Lok so yes, the liking depend on the age of the audience. I got this product for in exchange for my honest and unbiased review. All experience and words are truly mine and mine alone.
I used to create decals on etsy and spent a lot of time and created sure they would look good. Since I haven't done that in a while I figured I'd give this a shot as I wanted a more professional look to my ps4. For starters the instructions are a joke, there's a couple numbered sheets on the little picture but none on the decals themselves so you know what's what. They also don't line up properly when you do figure it out and give the appearance of some slightly smoother bandaids and you can see the color of the ps4 through the decal. This was the worst decal I've ever bought. Ive applied them to numerous consoles before and never had such a gaudy/cheap looking decal that created it look like a 10 yr old duct taped a console. Steer clear of this waste of money.Within a month the heat from the ps4 melted the shaudy adhesive from the vinyl a d it has warped all over and has begun rolling up
I place this on my system when I first got it, and it looked so amazing! It looked even more expensive and sleek. But, as I began playing my PS4 and it would obtain hot, the vinyl would begin bubbling up. So, I tried pushing the bubbles out, I tried pulling it off and sticking it back on tighter than before, etc. I ended up just throwing it away because it was starting to aggravate me and was not worth what I for it. Amazing looks for show, but not to play long hours with it on. Super disappointed in this purchase.
I must say, this is a very nice skin for the ps4. Looks very sleek. When I was finished putting this on, I texted a picture of my ps4 to a couple of mates and said, "I bought the fresh white ps4!" One of them said, "Why the heck would you that when you already have a black one?" This skin looks amazing enough to look like the white ps4. So obviously, it looks unbelievable and it's a very sturdy vinyl. It's not a plastic or anything that would peel off on its own. Also, It was very simple to install. It probably took me 10-15 mins tops. I lined it up and place it on. If it didn't look right, I just peeled it right back off and place it back on. It's very forgivable. It's not like you place it on and it never comes off. Also, It comes with a microfiber cloth to wipe off all the dust, etc. The skin covers the serial number and model number on the bottom, but I don't know why that would be a huge and it really doesn't matter at all to me. I figured I would place that out there for anyone who might care.A couple things that kept me from 5 stars, the pack (not the cardboard box the fedex guy brought, I mean the actual pack the skin comes in) isn't very impressive at all. It makes it look unprofessional. There also aren't any instructions which was weird. I'm not an idiot and I eventually figured it out, but it still would've been nice to see some sort of labeling system (maybe place color or number coding stickers on each piece and then have a picture booklet where the color/number goes). Also, when I inspect the skin closely, there are a few small black spots on it that won't rub off. It's not enough to message it when it's sitting on the shelf but when you look really closely at it, it's a small dirty. But allow me create it clear, I would definitely still recommend you to this skin.Positives:Looks amazingInexpensiveSturdy materialEasy installForgivable installComes with microfiber clothComes with two controller coversNegatives:bad packaging from Yemartno instructions (makes it look unprofessional)little dirty spots (on mine at least)Buy this skin! It's a amazing and it looks GREAT.
This was loosely packaged which lead the sticker to having all of the necessary corner pieces damaged and smudged in, this sticker won't stay on my ps4 because of it! I got a damaged item and regret this purchase. And the damaged corners allow air in which leads to the whole sticker practically peeling itself off of the ps4 with 20 mins on sticking it on. And also did I mention that I have to re press the sticker back on multiple times ON THE FIRST DAY OF APPLICATION! Unacceptable. AVOID these decals at all costs. Wast of time and money.
This is a amazing vinyl wrap for your PS4! If you don't wish to have scratches and hold your ps4 like fresh its recommended to one of these! if you wish a white ps4, but do not wish to destiny to obtain the white one this is the alternative! VERY EASY INSTALL. Its like a sticker and you can't peel it on and off very easily. If you create a mistake and apply it wrong you can fix it by just peeling it off! Just create sure you clean your ps4 for dust so it sticks better! The only reason why its not a 5 star is because the writing that says SONY, Playstation & the PS4 looks VERY blurry and not clear! it makes it look cheap. The picture provided on here does not present any writing, but it has the same writing/logos on your ps4. They need to create fresh pictures showing that part. I would recommend if you wish to create your ps4 white.
Pros-Product is OK, Goes on very easily , and simple to reapply and obtain out NS- No cutouts in the back for fan holes and other switches that are in the back. ALSO THE FRONT PART where its suppose to be white is missing on my ps4. DID not come in my pack so i have just the top and sides in white and front is black. Does not look so soon as you begin playing a android game for a few hours it just peels right back up from heat. Waste of money
Upon very close inspection the seams are visible and the stickers aren’t excellent sized but it blends much better with my fresh white television console. Instructions are ok and overall result is good. If you need a pure white PS4 a white PS4. For a decal kit this is beautiful good.
Looks good, nice and white, sticks to ps4Cons: Not precision cut. Some of the pieces don't match up perfectly to ps4. Don't bother with the "directions" on the envelope, just figure it out yourself because it's impossible to tell which pieces are which until you do and error, no piece is numbered or anything. Pain in the butt process.
Looks great, some bubbles, but it's all me, I am not good at installing these, along with those movies for cellphones. Do not use the controller ones, they look poor and cheap. Buy a white controller or take it apart and paint it. Also mine did NOT come with logos.
These seem to be created of decent quality. I don't know how fair this review is being as though I never installed the skin on my ps4. I was actually looking for a skin that had the logo chop out already. This does not. therefore my disappointment is not with the actual product, it is more so that it just wasn't exactly what I wanted. I wouldn't say that this is the fault of the manufacturer, but more so me not reading and asking the important questions.
Edges of decal never stuck to controller. Graphic looks good, but the only thing that I will hold on the controller is the nike swoosh on the touch pad. Everything else is coming off after a few uses.
Overall score: 4.5It was left in front of my front door but I guess that was because they didn't wish to bend it by shoving it in to my mailbox so that I overlooked. It comes in a shady looking glossy plastic envelope with tape covering the part you're supposed to begin and the seller's logo on the front. Inside the envelope is a thin rectangular plastic pouch that holds all the (4) sheets of skins. App process is beautiful easy and self-explanatory but for those of you who don't know you wish to peel off the additional parts first so that actually piece that you stick on won't have any of the residual skin cutouts. Thus below is my review of them.DISCLAIMER: I have only applied TWO OF THE FOUR sheets that it came with which are the joycons/connector ones and the console/kickstand one. I have no idea if the other two skins are defective or worse than what I've used so my review is based off of the ones that I have used.i. Print: The print itself isn't super high quality, like a crystal clear monitor or TV. However I wouldn't say that it's not good either, the print is amazing enough where it looks beautiful sleek and the characters on it look as if it were just hand drawn. The background isn't really defined and it's kind of blurry, same goes with the text which is almost indiscernible however if you're fine with that then the print is beautiful amazing overall.ii. Texture: First feel of the texture is actually beautiful smooth. It's not really one of those plastic sticker feelings you'd obtain at like a coin machine as a kid, more of a matte-like texture. It's doesn't really have a rubber or silicone grip to it so be careful of dropping it as it might slip out of your grasp if you have wet or sweaty hands and you don't keep it firm enough or the right way.iii. Sticker: The actual sticker part is beautiful good. It's sticky and holds on well to the switch's plastic components. It's well sticky enough that small dust particles that obtain stuck on shouldn't matter although I do highly recommend washing your hands prior to applying the skin and to wipe down the zone of app with an alcohol pad or a small soap on a damp paper towel; anything with cleansing properties should work as long is it's not too powerful and ruins the switch itself, reason being is because you wish to remove and oils and grease from your hands and switch for best possible results. When applied it doesn't move or warp for me. The sticker hasn't ruined the plastic on my switch so far when I peeled it off to reapply it more precisely so that's a amazing sign.iv. Cut: I wouldn't say the skin is precision laser chop or anything where it fits perfectly with your switch. That being said, I do search that it's decently accurate with the spacing of the buttons, joysticks, etc.; there are no weird gaps between them in my experience as long as you apply it as precise as you can. The actually cutout of the gaps aren't always excellent though. For example on the left joycon there's the record button that's in a shape of a square, the cutout of the shape there wasn't even on all four sides like a square should be, instead it's a bit uneven but it still fits fine, not perfectly. The overall would've been completely fine for me if it weren't for the skin for the actually console itself. The spacing between the gaps aren't even, from my experience. The part on the back where there's an indent for the charger when you dock and the two hollowed out locations next to it are beautiful close in terms of cutout, not perfect, but good. The issue arises when you're basing the entire skin's precision off of that section, it makes it so that the gap for the kickstand isn't even with its spacing of the kickstand itself and the the part where the edge meets the kickstand. The outer portion of the kickstand zone has a smaller gap than the inner portion which makes the rectangular cutout for the kickstand misaligned. Now don't obtain me wrong, it still fits, barely though. Then you test aligning the actual skin for the kickstand itself with the skin for the console and it's not excellent because the art is misaligned and if you test to put it correctly the sticker will be off of the kickstand's edge.v. Docking/Heat: The skin is thin so docking the switch isn't a issue and will slide it just as easily as if you didn't apply the skin. As for the heat I'm not sure how the skin will react yet, it'll probably be fine as is.Overall it's a beautiful decent product whether you wish some laughs with your mates or you're actually a fan of these things. It does have a few flaws that could be looked over if you don't have OCD or something. For it's ($12 is what I paid, including tax) it's fairly worth it in my honest opinion.
This skin is amazing! The print is extremely clear. The photos are high quality with no bleeds or smudges. The vinyl (I think it’s vinyl) is removable, which is really helpful if you have to reposition it if you don’t line it up the first few times around. (Like me)! The skin/sticker is thick and it feels great, which is nice since it’s on the back of the switch where you will constantly feel it. The chop outs line up perfectly. Such a amazing purchase!!
The decal goes on perfectly to the switch. It doesnt leave any glue residue behind and is easily moved incase you place it on wrong.I opted to not decorate my switch base but place it on my laptop as a might wish to be careful who sees it but it's really cute and amazing quality. No smudges or blur.
Got this for my boyfriend, and he loves it! The only thing was that the sticker for the kickstand was too wide and wouldn't fit so he didn't place it on. But other than that, its so lewd, too excellent for any ecchi lover.
I've had a long life, full of hard work and fulfillment in all I've done, and I finally have the lewdest Nintendo Switch around. I am now at is skin is great, app was a breeze, and it even included the dock front and back!
It takes a lot of patience applying the decal. Took me roughly an hour to obtain it lined up and bubble free. It is actually chop to the wii u; you just have to create sure it is aligned up with the other parts. First decal I bought for any of my systems and this first decal did not disappoint.