Read top 150 arduino project reviews, rating & opinions:

Check all top 150 arduino project reviews below or publish your opinion.

100 Reviews Found

Sort by: Most Accurate (default) | Newest | Top Rated

  • 0

    Useful review?

    ARDUINO EMG SENSOR PROSTHESIS ARM PROJECT []  2020-1-21 21:14

    No sΓ© cΓ³mo abrir el archivo

    0  


  • 0

    Useful review?

    IoT Learning Short Course : ESP32, Arduino,Project [App]  2019-1-22 21:8

    as a electronics processional i think contents are amazing

    0  


  • 0

    Useful review?

    THE BEST SIXTY PROJECT WITH THE ARDUiNO []  2019-12-23 20:25

    This book looks like it was written edited and had the printed layout performed by a 12 year old. The content, spelling and grammar are below par.

    0  


    Add your opinion on top 150 arduino project or scroll down to read more reviews ↓

     

  • 0

    Useful review?

    THE BEST SIXTY PROJECT WITH THE ARDUiNO []  2019-12-23 20:25

    amazing projects.

    0  


  • 0

    Useful review?

    THE BEST SIXTY PROJECT WITH THE ARDUiNO []  2019-12-23 20:25

    There is a lot of projects but if you fresh to this . May not be the best choice .

    0  


  • 0

    Useful review?

    IoT Learning Short Course : ESP32, Arduino,Project [App]  2019-1-22 21:8

    IT'S unbelievable 😍

    0  


  • 0

    Useful review?

    ARDUINO EMG SENSOR PROSTHESIS ARM PROJECT []  2020-1-21 21:14

    While this Kindle "book" is free it is all of seven pages and includes a picture of the concept, a simplified Arduino hookup, some uncommented code and a thingiverse link to files for 3D printing the prosthetic hand/arm. The concept is however interesting and a lot of youtube videos are out there describing this app of an EMG sensor to detect muscle movement and an Arduino reading the EMG sensor data and responding by actuating servos which in turn move fingers and so forth of the prosthetic arm. To obtain into this in a primary method I would recommend purchasing the EMG kit from Amazon, Sparkfun or Digi-Key, a easy single-digit (finger) 3D printed "hand" from shapeways, and you probably have an Arduino and a servo lying around. There is a amazing video in French with subtitles that describes in detail how to assemble the single-digit hand and install a servo.

    0  


  • 0

    Useful review?

    Arduino Project Handbook: 25 Practical Projects to Get You Started []  2019-12-24 19:38

    Amazing handbook . Some projects are too easy but I can buuild 4 or 5 projects I can use.

    0  


  • 0

    Useful review?

    Arduino Project Handbook: 25 Practical Projects to Get You Started []  2019-12-24 19:38

    Clean, clear, simple to follow instructions. I've worked through a few and I already know a bit about Arduino.

    0  


  • 0

    Useful review?

    Arduino Project Handbook: 25 Practical Projects to Get You Started []  2019-12-24 19:38

    Amazing book. Amazing projects. Not a teaching manual, but it's not advertised as one either.

    0  


  • 0

    Useful review?

    Arduino Project Handbook: 25 Practical Projects to Get You Started []  2019-12-24 19:38

    This is the excellent book for beginners who need pictures and a lot of explanations. I am going to use it in my 9th grade class next semester and will recommend my coworkers obtain copies as well. Thank you for finally making a book that the rest of us can understand and teach!

    0  


  • 0

    Useful review?

    Arduino Project Handbook: 25 Practical Projects to Get You Started []  2019-12-24 19:38

    Perfect with color photos ! It even has key words in color !. Indentation is great. The only fault is in putting beginning curly brace at end of line instead of on next line. Putting ending curly brace on next line makes the code block much easier to see, especially with indentation. I can highly recommend this.

    0  


  • 0

    Useful review?

    Arduino Project Handbook: 25 Practical Projects to Get You Started []  2019-12-24 19:38

    This is a amazing book if you are looking for a reference that does not create any assumptions about your current knowledge of Arduino. It is extremely clear and simple to read. No unique knowledge needed to obtain started. Everything is explained using common daily language. The attention to detail is helpful.

    0  


  • 0

    Useful review?

    Arduino Project Handbook: 25 Practical Projects to Get You Started []  2019-12-24 19:38

    Most of the projects we tried so far don't work. And why? Nobody bothered to edit the book and to test the projects to create sure everything is right. Sometimes they have the code wrong, sometimes they forget to present all the connections that are r example, project 22:- They list the wrong numbers in the code. A few pages later they do have the correct numbers, but I had to spend endless hours on the internet to figure them out.- The forgot to present that you need to connect a wire to the GND.- They don't present you where the - and + signs are on the breadboard.- The layout they have for the Arduino board has completely blurry inscriptions. My eyes damage after trying to decipher what was written on their Arduino board, and mostly I was unable to tell.- Something else is wrong, as the project just doesn't work right (the motor spins all the time and pauses for a second when the correct code is pressed, instead of spinning only when the correct code is pressed. I've given up on trying to figure out why that ey have some cool projects in the book. But these can be found online for free, including codes. The reason I wanted the book is that we'd have a step by step fool-proof tutorial to cool projects. My son and I don't know much about Arduino and we still wanted to be able to built some cool projects. We weren't able to with this book, and my son lost his interest in ry disappointed, and feel this is wasted so note, most of the reviews of this book are by unverified reviewers. I think this speaks volumes.

    0  


  • 0

    Useful review?

    Arduino Project Handbook: 25 Practical Projects to Get You Started []  2019-12-24 19:38

    Ideal book for someone fresh to Arduino projects and programming.

    0  


  • 0

    Useful review?

    Arduino Project Handbook: 25 Practical Projects to Get You Started []  2019-12-24 19:38

    This book is better than most introduction to Arduino books. It's fairly well illustrated, and clearly written. There's enough explanation of how it all works to teach you what you need to know, but doesn't force you to go too deep into can go online and download all of the programming so you don't have to type it all in. That alone makes this a amazing e only fault that I found is that it doesn't have an index in the back of the book. If it did, this would earn an simple 5 stars.

    0  


  • 0

    Useful review?

    Arduino Project Handbook: 25 Practical Projects to Get You Started []  2019-12-24 19:38

    Purchased this book for a STEM educator college course for my graduate degree. Amazing projects! Simple to follow.

    0  


  • 0

    Useful review?

    top 7 best places to buy lasix in Finland [buy lasix in Toledo]  2020-9-14 1:27
    [email protected]

    purchase lasix from Omaha lasix how much where to buy lasix in St Louis lasix online pharmacy in San Jose buy lasix online from El Paso how to buy lasix lasix online in india

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    all in one best application

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    For an old ver

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Amazing

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    πŸ™πŸ™πŸ™πŸ™πŸ™πŸ™

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Ghatiya

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Not poor

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Very very nice

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Very poor application dont download

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Super

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Wow this is awesome application

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Nice application

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Why this application not having download option in internal storage ? And also not having a sharing option as well

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Very amazing and owesome

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    😊😊It's very nice😊😊

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Its an unbelievable application

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Nice

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    πŸ‘ŒπŸ»πŸ‘ŒπŸ»πŸ‘ŒπŸ»πŸ‘ŒπŸ»πŸ‘ŒπŸ»πŸ‘ŒπŸ»β˜Ίβ˜Ίβ˜Ίβ˜Ίβ˜ΊπŸ‘

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Ganpati bappa morya

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Superb

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Amazing

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Superb app. Got all whatever i wanted in single app. Is there a method to sync it with google mini or Alexa.

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    I just downloaded y be it will be amazing .god bless

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    πŸ§’r useful to me

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    tamann a Saini

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Super

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Jai shri ganesh

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Sabari

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    amazing application

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Poor

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Amazing

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Might be amazing because can,t install app.But go with other revives

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Lord Ganesh Mantras builds yr Confidence and Trust and brings Amazing Luck with very Postive ENERGY VIBRATIONS BOOST in Lord Ganesh Mantras Hold it Up.

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    It is nice for ganesha thanks for giving this apps

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Maduri.anitha

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    I like all songs of Ganesh Bhagwan

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Dh

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Or superb

    0  


  • 0

    Useful review?

    Top 150 Ganesh Songs – Aarti, Mantra & Bhajan [App]  2020-8-24 13:35

    Nice

    0  


  • 0

    Useful review?

    REXQualis UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-2-6 23:38

    Amazing value for a starter microcontroller kit with so a lot of sensors. I have it only 1 day but I already learn a few things from the kit.I followed the instruction to the dot and had issue getting Windows 10 to connect to the R3 Uno. Download and install the recent Arduino 1.8.5. My R3 Uno was not loaded with anything since the amber 'L' led was on constantly. I follow the RexQualis www service instruction and in Tools, set the board as "Arduino/Genuino Mega or Mega 2560" and was not able to connect to upload the Blink sketch. I thought may be I obtain a poor board. The chip is ATMEGA328P-PU, but Blink did upload and works when I change the board setting to Arduino/Genuino Uno. It would be amazing if there is some table that we can check the Atmel chip model and then correctly set the board to in the Arduino IDE without any guesswork.

    0  


  • 0

    Useful review?

    REXQualis UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-2-6 23:38

    My REXQualis UNO Project Super Starter Kit just arrived today so I haven't gotten to begin learning with it yet but I'm extremely excited to do so. The parts came packed fairly well in the case. There's not too much room for parts to jumble around inside the case but I would have loved to see some foam protectors on the pins of the boards. Nothing looks damaged at all but with the method shipping can be these days, it doesn't damage to be cautious. The boards look high quality and in a fast try of the external breadboard the sockets were powerful enough to keep the whole bundle of jumper wires hanging upside down with just one pin plugged in. Overall there's a ton of items in this kit to begin learning with and I have no doubt I got my money's worth. As soon as I obtain some study time, the tinkering will begin!

    0  


  • 0

    Useful review?

    Arduino Project Handbook, Volume 2: 25 Simple Electronics Projects for Beginners []  2019-12-24 19:46

    As a beginner, this was the ideal book.

    0  


  • 0

    Useful review?

    Arduino Project Handbook, Volume 2: 25 Simple Electronics Projects for Beginners []  2019-12-24 19:46

    Amazing projects to work on!

    0  


  • 0

    Useful review?

    Arduino Project Handbook, Volume 2: 25 Simple Electronics Projects for Beginners []  2019-12-24 19:46

    Perfect Practical Software and Hardware Learning Projects. Color Illustrations Inexpensive To is is an perfect project book for the Arduino. All experiments are fully illustrated with color plates including code and assembly. Unlike some other Arduino project books no handcrafting skills beyond the simplest of soldering is needed to carry out the projects, no cutting and pasting no glue gun. Most of the projects can be completed with any of several under $50.00 "Arduino Starter Kits" available from several Chinesae manufactures such as Sainsmart and Seeed Studio. This book provides perfect experience toward building more complicated systems with the Arduino or other embedded systems.Highly Recommended

    0  


  • 0

    Useful review?

    Arduino Project Handbook, Volume 2: 25 Simple Electronics Projects for Beginners []  2019-12-24 19:46

    This second volume of Arduiono Projects features the same attention to detail and ingenuity that has become a signature of the No Starch Press series. Plenty of illustrations and color photography and artwork to support tutorial the beginner. Project projected time commitment and costs are noted at the beginning of each project. A welcome library addition to the budding electronic genius on your bonus list.

    0  


  • 0

    Useful review?

    ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items) []  2020-6-28 18:4

    This kit is excellent for an Arduino beginner such as myself, as I have never messed with Arduino before. It was very well thought out and packaged, I only want there was a hard copy book instead of the .PDF on the CD. In one day I built all the examples given in the book and even learned enough to begin mixing the examples together and modify them. This kit actually has me excited enough that I think this will be a fresh hobby for me and I would definitely recommend this kit to anyone else that is a beginner and interested in micro-controllers. I would also highly recommend getting a book with this kit like I did, it helps allot more then just the info in this kit alone.Β Programming Arduino: Getting Started with Sketches, Second Edition (Tab)Β This book will teach you a ton and doesn't assume that you have prior programming experience. But this Complete Starter Kit does have more then enough by itself to obtain you started. This has a amazing selection of quality sensors to obtain you going too as well as some amazing starter output devices. If you plan on getting started with Arduino definitely obtain this kit!

    0  


  • 0

    Useful review?

    ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-6-28 18:4

    Bought this kit on cyber Monday for about $7 cheaper than current list price. Although this Chinese Arduino clone vendor is charging such a reduced fee for this package, the buyer gets a heck of a lot of cool components in here. I’d definitely pay full price all over for this kit now that I’ve explored it for a couple hours.I am excited to go through every one of the guides Elegoo has published for this kit. They are concise and do a amazing job covering the electrical engineering principles behind the included components. I’m dropping a star only because they could improve the docs in regards to installing and configuring the Arduino IDE on the Mac OS platform. Instead, they detail the windows considerations and then suggest the Mac settings will be similar. That is a euphemism for β€œYou hafta figure it out yourself.” Fortunately for my, setting up the Arduino IDE on my PowerBook just worked and I ran into zero snags.UPDATE: I wish to also mention the advantage of going with an Arduino versus a Raspberry Pi or BeagleBoard (I own a lot of of both those). For the beginner tinkerer, the Arduino reduces the dimensions of complexity getting your program into the device and doing things. Raspberry Pi, etc. are very amazing for higher-performance applications, but are overkill for the type of projects you would place together with these kinds of parts. What I'm trying to say is the Arduino platform is a amazing starting point and offers lightweight energy requirements (can be battery powered). All the parts in this kit are fully compatible with Raspberry Pi and BeagleBoard, so you can carry them over should you decide to delve into the other platforms.UPDATE 2/28/2018: I have spent perhaps a dozen hours with this kit and continue to have fun the collection of parts and appreciate the tutorials. The Arduino UNO is a very capable microprocessor board, but it does offer a finite amount of input / output pins. As the guide progresses into implementations that exceed the built-in ports, they introduce this other chip that can take commands and forward signals to additional, external pins. This allows output to go to multiple devices (LEDs, stepper motors, etc.) beyond what would be available with just the built-in pins. Working your program code around this constraint offers a fun dimensional puzzle. For my non-experimental projects, I have chosen to go the route of the Arduino Mega board that offers a vast amount of extra pins than the UNO. The model sold by Elegoo on Amazon is only about $14, so that pricing is very beautiful for reducing the complexity of my logic control coding.

    0  


  • 0

    Useful review?

    Arduino Project Handbook, Volume 2: 25 Simple Electronics Projects for Beginners []  2019-12-24 19:46

    For a beginner its a amazing book.

    0  


  • 0

    Useful review?

    REXQualis UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-2-6 23:38

    I've gone through about half of the lessons on this and at this point I think it's safe to say that I'm not very impressed with this kit. While it's a seems like a amazing deal for the amount of pieces you get, the quality leaves a bit to be desired. I've been able to obtain through most lessons so far, but it has been a bit rst off, the guide tutorial is really bad. I downloaded everything from their www service (since a earlier review they noted they updated the guide). I found it full of errors, especially the visual schematics. The lessons are beautiful much instructions of where to plug things in to create it work, but doesn't go into much more substance than that. This is less necessary but it's also full of spelling errors which seems ridiculous when even the most easy word processors have spell check built in.I didn't expect much from the included guides but I've had problems with a number of the parts included. About half of the included LEDs didn't work, but the most frustrating was the low quality breadboard which is the backbone of a lot of the projects. Some of the rows were really difficult to obtain parts to slide into, while others were so loose that the parts just jiggled around and wouldn't create a amazing connection. These poor connections end up causing a lot of unnecessary troubleshooting, I've spent a lot of time poking around the board trying to rewire the project so it avoided the spots on the board with poor connections.Overall, there are lots of pieces with this for what you pay for and the parts are labeled well enough. But if you're just starting out with Arduino stuff, I would look elsewhere for something a small higher quality to save you from the frustration of troubleshooting what is ultimately poorly created parts.

    0  


  • 0

    Useful review?

    REXQualis UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-2-6 23:38

    This is a amazing Starter Kit. I've purchased several, here are the advantages of the RexQualis:1) the box is larger, fits everything more comfortably2) contains a 9V plug-in power supply - in addition to the 9v battery snap3) the Arduino clone has printed labels on the break-out pins4) it comes with a CD that contains the code/sketches to use the supplied components

    0  


  • 0

    Useful review?

    ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items) []  2020-6-28 18:4

    This kit is a GREAT and inexpensive alternative to buying an expensive arduino kit. Any one who is interested in learning about micro controllers and how they work should obtain this e product comes with a CD which has PDF lessons, libraries and code. There are some problems with the PDF tutorials. I just don't wish beginners to obtain discouraged if the programs are not working properly. If you have a problem, go online, and search a solution pretending what you got in your hand is a Arduino Uno, not a Elegoo Uno. The programs, code, projects are all similar. It always worked for me. I have found some problems with lesson 32, and would like to give people some feedback.Lesson 32 Issues:There is a arduino file named "With_Remote" in the Lesson 32 folder.When the comments on the code say // Rotate CW it really means Rotate Counter Clockwise.When the comments on the code say // Rotate CCW it really means Rotate so, in order for the project to work the method it is supposed to, you will need to push the "VOL+" and "VOL-" buttons on the remote control. (There are no UP and DOWN buttons on the remote control , as mentioned in the code comments.)Lastly, if you are getting a "'TKD2' was not declared" compiler error ( you will know what i mean when you see it ) ,you will need to go to C Drive > x86 > Arduino > libraries > RobotIRremote > src. After clicking on the folder named src you will see 2 files named IRremoteTools.cpp and IRremoteTools.h. Chop these 2 files and paste them somewhere else ( on your desktop for example). These files conflict with other files in the Arduino library and dont allow Lesson 32 work the method it is meant to work. Just dont delete them permanently!! You might need them later.I will post more updates on the kit as time passes.

    0  


  • 0

    Useful review?

    ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items) []  2020-6-28 18:4

    Item came in an organizing case; that was amazing and incredibly convenient. Kit is unbelievable for an intro to only complaints:1. The Relay: you have to bend a pin on it to fit it in the breadboard. NO method around it. The pin on mine is gonna break after only messing with it a few times. Would be nice if it came pre-mounted on a little PCB or something, like some of the other components.2. L293D chip is bad. Has problem operating motor. Will only run motor in one direction, and it barely works doing that.3. My thermistor (even after using a completely various code) reads my 70F (21C) living room as -3F (-19C). It's completely useless.Update!!!!:Spoke with company. They immediately place fresh replacement parts in the mail. They even hooked me up with a few more breadboard wires. Just got them all yesterday. Still beautiful satisfied about the entire kit. 10/10 would gardless, its still worth it.

    0  


  • 0

    Useful review?

    ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items) []  2020-6-28 18:4

    I started an online course in Arduino and purchased this because of the price and the boat load of the electronics required for the course. I didn't expect this kit to build a robot or a permanent device, but to give me a broad overall begin which ever method I end-up going. Halfway through the course and I only required one sensor not in the package. Looking ahead, everything else is covered with additional parts not even e whole kit comes in a nice, clear plastic case. All the components are well place together and I haven't had to solder anything for them to work. The bread board is large compared to what is used in the online course. There are additional LEDs and resistors which are the most common stuff that I have used in multiple course projects. There are at least two of most of the little bits and they are in their own smaller case that fits in the larger, which is nice. With so much in the case it isn't always simple to search a particular sensor or to obtain everything back in. There is a insert in the lid that lists the parts with a picture to identify it.I did check the CD and my copy had all the source code, IDE, and sensor libraries. No searching the internet to search those. In 15 mins of opening the case, I had blinking LEDs with my first e main Arduino board is 3/4 the size of a deck of cards and seems to work like a champ. Everything is clearly marked on it and plugs are far this has been a amazing starter kit for me and my son is right behind me waiting his turn with it.

    0  


  • 0

    Useful review?

    ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items) []  2020-6-28 18:4

    I'm not a beginner with electronics or micro-controllers. I bought this kit to quickly and inexpensively grab some sensors for a project that I'm working on, and to add some parts to my parts bin. I'll begin by saying that the Arduino clone itself seems to be a perfectly workable unit. It's available for ten bucks by itself on Amazon, and it's well worth the money. The rest of the part in the kit, however, are a true mixed bag. Several sensors (and the LCD display) came with seriously bent pins, and some of them (DHT11 and one of the potentiometers tested so far) are just plain dead. I know how to implement and try these devices. It isn't a mistake on my end. They're dead. Fortunately, those two components are worth less than $5, and other stuff seem to work, but I haven't had time to try them all. Similarly, several of the male-to-male jumpers have literally fallen apart, something I've never before encountered with something as easy as a jumper wire. The LCD display (once the pins were straightened) is one of the dimmest I've ever used, no matter how I adjust it. For the price, assuming 75% of the components are functional, I still think this kit is a solid buy for a huge pile of Chinese components, but I couldn't recommend it to a beginner, as the doentation (which comes on a CD) is very poor, and the shoddy parts could be very frustrating for someone without a spare on hand.

    0  


  • 0

    Useful review?

    ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-6-28 18:4

    This is absolutely amazing! I remember dismantling remote control vehicles as a kid, to see the wires and motors, but never being able to place everything back in working order. This set is the respond to that curiosity (answering questions like: "how does this work?")-- but now children can build a device from the circuits up, rather than deconstruct their RC vehicles and other son worked on this until the wee hours of the morning, then got right back to work the next morning. We hardly saw him until he finished the kit and asked for the kit to begin the next stage. It's crazy how my child already knows how to program a robot, and I can barely build a potato battery.We've already purchased the next kit (a remote control robot/car), and we'll test to hold a kit lined up for each stage, so that his passion doesn't diminish between projects.

    0  


  • 0

    Useful review?

    ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-6-28 18:4

    I created a plan to learn Arduino. Wasn't sure where to begin and saw this kit. I figured it would be cheap or funky, wow was I wrong. The kit is packaged in a little box but it explodes to so a lot of projects. The code provided on the Elegoo website works perfect. I downloaded several sketches (programs) for the different lessons and every one worked straight out of the box. Simple to then experiment with the sketches and add your own ideas to the program and hardware. This kit is well thought out, obviously used and tested for content and format by the seller. I haven't contacted them and don't think I will have to but their web website has everything I have needed. The programs and drivers and manuals are claimed to be on the CD but I didn't try it, I usually just download what I need rather than firing up the CD in this kind of kit. I think this is a amazing starter kit. My only negative comment and it is more about my organization than the kit is that I will likely never be able to place it all back in the box, it was packed with a plan like a Swiss watch, I'm going to obtain another box so I can place it away when not in use, LOL.

    0  


  • 0

    Useful review?

    Arduino Project Handbook, Volume 2: 25 Simple Electronics Projects for Beginners []  2019-12-24 19:46

    Good

    0  


  • 0

    Useful review?

    Arduino Project Handbook, Volume 2: 25 Simple Electronics Projects for Beginners []  2019-12-24 19:46

    I found Arduino Project Handbook, Volume 2, by Tag Geddes very helpful. The subtitle is 25 Electronics Projects For Beginners, but I believe the book will be valued by readers at all levels of knowledge and expertise. It contains sections on Installing Libraries and Understanding The Sketch, which I found especially useful for some projects I am planning to do soon. There is lots of construction and design info including using a breadboard and obtaining pinouts. The diagrams and images are superb.I recommend the book highly and I will be informing colleagues of this amazing fresh addition to electronics literature.

    0  


  • 0

    Useful review?

    ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items) []  2020-6-28 18:4

    This is a decent kit in terms of the number and dozens of parts and components which are supplied. I only had one faulty part in my kit, which was a servo motor that did not rotate the full 180 degrees. I replaced it for the exact same part, found in a local electronics store, for $e Arduino Uno Rev 3 board which is included is amazing quality. In fact, it is now being used 24/7 full-time in one of my projects, which is an AC Power Failure monitor with cellular SMS alert. I have since replaced the board with another Elegoo Uno Rev 3 board from e kit comes with a PDF manual, as well as sample code for all the lessons. The lessons and sample sketches cover the breadth of the supplied components beautiful well. However, the manual only describes how to place the sketches together and run them, and not much else. It does not explain how the code works. In that respect, the manual is not good for learning. A beginner will likely not be able to gain the knowledge required to write their own sketches or develop their own project ideas. For beginners, I recommend acquiring a amazing book on Arduino, and working through the book, while using the supplied components in this kit. I recommend "Arduino For Dummies", by John Nussey. This will provide a amazing start. Once they finish the book, they will have a much better knowledge of Arduino hardware and C++ coding. Then, they can work through the manual that is supplied with this kit, to learn the specifics of some of the components that are not covered in the book.

    0  


  • 0

    Useful review?

    ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-6-28 18:4

    Β This is the best 30 dollars I've ever spent! Lots of content. Not disappointed one bit despite it being a Chinese clone of arduino, it's one of the better quality clones out e CD comes with about 20 guides to obtain the basics.I bought this because I'm studying electrical engineering at college, so I learned c++ and learning how to program this is even simpler than that. Hours of endless fun, can't wait to create some cool projects.I recommend the book called arduino by Jeremy Blue (which is only 20 dollars) to learn so the plastic container that it comes in is very little so its just like taking a tent out of the bag all of it will not fit back in the method it came...lol but i have a shelf with about 50 small drawers to shop the components. it would create a amazing gift.

    0  


  • 0

    Useful review?

    REXQualis UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-2-6 23:38

    We were able to obtain this kit up and running in no time. My 9-year-old son and I were able to build a few circuits that were working as promised. Overall, this is a amazing kit for Arduino beginners. The super-low price is awesome! Value for cash is hard to beat. It was so simple to connect to my laptop, download Arduino software and begin running code. If you know C/C++, that will support a lot. If not, don't worry - there are dozens of Arduino projects available online that include the important code. You don't have to be a programmer to have fun this set. It is a amazing method to obtain children interested in electronics. If they are at least a small into it, their eyes light up when they see that they can actually build a working circuit! Overall, highly recommended.

    0  


  • 0

    Useful review?

    REXQualis UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-2-6 23:38

    Well worth the cash spent. Bought mine for a ten year old with a desire to build things, and so far he has loved it. The pdf guides are laid out in such a method as to be very simple to understand. And the included video's come in handy as well. The dozens of parts and shields hold it new so no one gets bored too quickly. There are a few mistakes that I ran across in the pdf guides regarding how some of the experiments are connected via the breadboard, but a keen eye can spot them and create the right connections when needed.Over all amazing collection of Arduino gear for someone wanting to learn.

    0  


  • 0

    Useful review?

    Arduino Project Handbook, Volume 2: 25 Simple Electronics Projects for Beginners []  2019-12-24 19:46

    Amazing follow up of the first book. Very exciting projects. Attention to details, and well explained codes.

    0  


  • 0

    Useful review?

    REXQualis UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-2-6 23:38

    Wow you obtain a LOT of items for $32. I've only worked through a few examples, but so far everything has functioned perfectly. The board interfaces with the Arduino IDE quite seamlessly. The only hitch I've had so far was having to manually figure out what comm port the USB was identifying as. Other than that, it's been fairly idiot proof. I saw someone complaining about the sloppy fit of the breadboard, and that has not been my experience. However I will say that the holes are sized for the jumper wires, LEDs, etc. but the resistors have much finer leads on them. I've found that simply folding the resistor leads over, and shoving them into the breadboard holes gives me a amazing e user tutorial and examples are quite obviously translated from Chinese, but overall they're beautiful good. And I love that the examples each have a video file showing the thing in action. They're very helpful in letting someone who is not a classically trained EE figure out what's actually going on in the circuit diagram. Some of their examples had coding errors in them, but being a SW Eng that's the simple items for me to l in all, this is a amazing kit. The bang-for-buck is off the charts. And now I know what I'm getting my nerdy small niece for Christmas.

    0  


  • 0

    Useful review?

    REXQualis UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-2-6 23:38

    This kit is particularly amazing for a beginner that knows small about microprocessors. Not only does the kit contain a huge number of parts but it also includes a very detailed explanation (Data Sheets) of each part. Also a gift is a C++ primer for those who have some primary programming concepts but lack C++ knowledge. The only improvement that comes to mind would be to provide a Arduino with JTAG debugging capability but this would double the cost of the kit and it is not generally required for beginners.

    0  


  • 0

    Useful review?

    ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items) []  2020-6-28 18:4

    I was looking for an Arduino clone starter kit and considered a lot of options. I’m an Electrical Engineer with 15+ years experience designing, manufacturing and testing zone flight electrical hardware for satellites. I have a very high standard for quality and was hesitant to purchase this kit due to its low price and my fears that it would be total junk. However, I figured the price was so darn low that even if it turned out to be junk, it wouldn’t be a large waste. Wow, am I glad I bought this!First, the set arrives in a very useful organizer. I found this to be a really nice feature and helps save time when searching for parts to build each various project.Upon initial inspection, the quality of each component appeared very acceptable. Definitely low-quality parts β€” as you’d rightfully expect at this price point β€” but certainly no where near β€œjunk” quality. By low-quality, I’m referring to mostly the solder quality, but also the individual piece-parts used in the assemblies are your standard Chinese low-grade parts. Some soldered parts were installed misaligned and some PCB assemblies still had visible contamination on them from inadequate washing. Again, this is all to be expected at this price point and so far, I was very pleased. The true try is if everything worked...I completed all the guides and found the instructions very simple to follow. A CD is included in the kit, which supposedly includes all the needed software, guides and datasheets. My laptop doesn’t have a CD ROM drive so I downloaded everything on the Elegoo website. That’s probably the best option anyway β€” that way, you know you are using the recent versions of everything. The datasheets were a nice-to-have, although some of them were not as detailed as they should be. Still useful nonetheless. The guide manual was clearly written β€” it’s definitely not poorly translated Chinese-to-English like I expected. It’s entirely written in clear English. In some places, I [email protected]#$%! did a better job explaining the code and syntax, but honestly, that’s something Google can handle. Every guide was completed easily and I only discovered one technical mistake: the guide on DC motor control omitted a groung jumper between the Arduino board and the breadboard/motor controller board. Consequently, the control signal logic levels were not correctly referenced to the same ground potential on both boards. The motor did not answer correctly at first but some fast troubleshooting lead me to add the ground connection and everything worked flawlessly after that. I’ve tested every component in the kit now and everything works as intended. I’m a small bit surprised at this but very, VERY is kit has been a ton of fun to play with. It’s excellent for anyone wanting to obtain started with Arduinos. It has so a lot of various cool components that this will hold you entertained and obtain your creative juices flowing. I highly recommend it!

    0  


  • 0

    Useful review?

    ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items) []  2020-6-28 18:4

    Overall this is a amazing started set, it comes with enough to do a lot of beginner e Elegoo UNO board has performed just as well as the true Ardruino board. I have been testing every project on this board and a legit Arduino board and have found no differences at all. This board works perfectly with the Arduino st of the included parts are amazing and work perfectly for beginner projects, however I do have some complaints and issue with a few parts. The included resisters do work, and present the correct resistance when tested with a multi-meter, however they are some of the cheapest resistors I have ever seen, the wire is so ridiculously thin that it is annoying to insert into the breadboard without bending them, also when you do obtain it inserted they are so little that the bread board does not grip them well, I have had to wiggle them around and change slots on the breadboard to search the tightest slot in order to obtain a solid connections. The included Mosfet transistors are very little and weak, using them for the standard DC motor guide caused them to obtain extremely hot and burn out, I replaced them with stronger mosfets. I had problem with the rotary encoder, I am not entirely sure if it is defective or if the issue is on my end, it works, but not well. I have tried almost everything from this kit, I will come back and modernize this review if I encounter any more problems.Another thing that bothers me is that they do not contain any technical specifications on any of the parts, no diagrams showing what pins are for what, no info on what the part is rated for. You can search this info for most of the parts by googling the part number, but some parts dont have any identifying e pictures I added present a true Arduino board, but I did try everything with both the Elegoo UNO and the true UNO and worked the same on both, I just forgot to take the picture when the Elegoo board was connected.Overall this has been a fun starting kit and I do have fun it and feel it was a amazing purchase.

    0  


  • 0

    Useful review?

    ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items) []  2020-6-28 18:4

    After completing almost all of the 30-something experiments from the downloaded pdf file, I can fairly evaluate the kit and contents. The directions for the experiments are quite good, I wired up each one with no problems. What they don't tell you is sometimes one project is used in the following lesson(s) as I discovered after I pulled everything apart in one ere is somewhat of an effort to describe the code and the sensor hardware but I believe this should be greatly expanded. This seemed to me as "here's how you wire up the lesson and this is what it does" but I wanted to dive much deeper with some of the sensors. They have a amazing explanation of the shift register though which I found interesting.I also bought the Sunfounder sensor kit and I like how they have every part on a board - for example there is no need to put resistors or LEDs on the breadboard for any lesson unlike this Elegoo kit. Even the pushbutton is on its own board, with the Elegoo kit they provide two loose little pushbuttons which I could not obtain to stay in the ere is an infrared lesson where you use the IR remote to trigger an IR receiver that I could not obtain to work. I checked the remote control battery and it was okay. Then I discovered the Sunfounder kit has a related remote and it worked so the Elegoo remote was without a doubt defective.I could not obtain the true time clock (RTC) to work, I don't know if it was the code or the RTC module. I place my scope on one of the module pins and I had a ~35 Khz signal so the module was sort of nclusions:Pros - the lessons are very well written and simple to understand. Somebody place a lot of work in these and it shows. There are a bunch of modules and several components (couple of chips, bunch of LEDs, resistors, etc) in the kit. After you complete the lessons the parts will be a amazing addition to your parts box. Oh, they contain a prototype shield - a amazing ns - I want there was more detail describing the code and hardware. For the beginner that's focused on what a sensor can do with an Arduino it's fine but I would like to learn more about the code. Defective part(s) - the included remote was bad. I think I'll take it apart just because. The true time clock module *might* be defective, this needs more investigation. The lessons that build on a previous lesson should have a notation NOT to pull your wiring apart since it will be used next. I tore one apart that took quite a bit of time to wire and I wasn't going to redo thoughts - if you can obtain this on an Amazon deal, it's a lot of parts for the money. I have no regrets buying it even with the poor remote. The sensors and Arduino Uno board are a amazing addition to my parts bin.

    0  


  • 0

    Useful review?

    ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-6-28 18:4

    When I ordered this, I figured it would be some cheap small (you obtain what you pay for) kit. I figured it would at least be amazing enough to dip my hand into the Arduino world. Then when it arrived, I quickly realized this isn't some small makeshift kit. This project kit comes with everything you could need to obtain you started with learning arduino. Everything in the kit was of good/excellent quality. There are a lot of guides online to tinker with all the sensors, motors, lcds, etc in this kit. I've learned so much in the few days that I have had this. I decided to learn Arduino so I could build a low voltage cutoff switch into my solar equipment. After just a few days of learning Arduino hardware and software, I feel like I have 90% of the knowledge I need for my first project. Want me luck!

    0  


  • 0

    Useful review?

    ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-6-28 18:4

    I am giving this five stars because I messed with the board and most of the sensors, and they work flawlessly. Most of the lower reviews are because of the CD being blank or the doentation being confusing.I didn't use the CD that came with it, or any of the doentation or tutorials. I have been working through some Youtube guides for Arduino and that has served me well enough.I was thinking about getting one of these for my 10 year old nephew, so I bought this one for myself to see if it is age appropriate. I don't really think he'd have the attention span for it yet, but I've been having a amazing time with it.I recommend buying some more jumper wires and breadboards- the kit comes with plenty for easy projects but I have like 5 various things going on and am almost out of jumper wires.

    0  


  • 0

    Useful review?

    ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-6-28 18:4

    There are SO a lot of options when it comes to purchasing an arduino/clone, accessories, and tutorials. I quickly discovered that there is nothing that makes this 'kit' better than any other. The guide is a disappointment. It does not teach, it is copy-and-paste. The breadboard I received is junk. The holes do not line up with the actual connectors inside the breadboard. I have to fish around to obtain every single wire into a hole. Any component with multiple wires is a nightmare to test to press into the board. The wires are not good too. The ends are jagged and they're covered in some sort of plastic that peels off during use. I tried the potentiometer. The knob is so tight that it's unusable. If you test to turn it while it's connected to the breadboard, it will just come out. How about the resistors? If you test to read the color bands, you need to know which side is which, in order to know the correct value. The printing of the color bands sucks, so you arent going to know sometimes. It's really discouraging to test and learn something fresh when the 'tutorials' suck and the equipment is defective. Arduino guides are a dime a dozen (unless they arent worth 1/12 cent, like these) Just find online. I'd recommend trying a various kit as well. You can't do worse than this one.

    0  


  • 0

    Useful review?

    Arduino Project Handbook, Volume 2: 25 Simple Electronics Projects for Beginners []  2019-12-24 19:46

    They worked as expected

    0  


  • 0

    Useful review?

    REXQualis UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-2-6 23:38

    This is a unbelievable starter kit for Arduino. Use it for self-study or something for bonding time with any child 12 and up (younger if very bright). And if I were the 12 year old, I would have gone crazy with it on my own. The breadboard that comes with this kit is related to the breadboard I bought when I was 13 and, adjusting for inflation, I think the whole Arduino kit cost me what that first breadboard alone cost me. The DVD is perfect and clearly shows how to build everything and use everything in the kit. Projects will take you 30 mins tops to create and learn from.

    0  


  • 0

    Useful review?

    REXQualis UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-2-6 23:38

    My 7-year-old son isn't the Lego type, but he loves electronics. This kit has been a large hit with us. It has everything you need to do tons of experiments and is very nicely packaged. Everything is clearly labeled and the instructions are simple enough to follow. Seems to be a much more authentic coding/engineering experience than those programmable robot toys or kid-geared circuit boards that only do a few various things.

    0  


  • 0

    Useful review?

    ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-6-28 18:4

    I have been in software development for over 15 years, and working with Arduino and other micro-controllers for over 5 years now, and am still quite impressed with this kit. It has a plethora of common components to obtain started with which would take some time to gather independently, but probably more importantly this kit has an perfect guide and reference manual. Whether you use the included CD or download the 500 MB pack from their website, you will search a well thought out structure, instructions and guide manual, Arduino installation software, and code samples all available in several various languages. The guide covers something like 24 lessons starting with the basics and ending with some more advanced projects. The instructions are quite clear with pictures and sample code is included as for the included components...The cloned Arduino Uno R3 looks almost identical and works as amazing as the original. I love the silkscreen on the side of the headers. I do want everyone would do away with the USB B connector and switch to the more common micro USB connector, but alas I guess they figure we still need backwards compatibility with the original. The micro-controller is the extremely common ATmega328P running at 16 mHz. The USB-to-serial interface is using the official Atmega16u2 chip instead of some generic chip (like the CH340G or something that cheaper kits use).This kit contains not just one but two various solderless prototyping breadboards as well as a power supply module that plugs into the bigger one. There is a amazing selection of two various motors and a servo. There are several options for displaying data like the 7-segment displays or the larger hero LCD. There are several sensor modules for things like temperature, humidity, proximity, infrared, etc... Then, there are the more common components like switches, resistors, LEDs, buzzers and so sically... this kit includes enough parts for hundred of various Arduino projects and is enough for anyone to obtain started. I already have quite a selection of Arduinos and Arduino modules and components, but really like this kit because it provides a convenient all-in-one set of components and handy storage case that I can bring along with to present and support others out with their projects.

    0  


  • 0

    Useful review?

    ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-6-28 18:4

    A really amazing kit with everything you need to obtain started. The kit includes several types of sensors to experiment with, and provides extensive code examples and guides to walk you through several various projects. I purchased this kit as a newcomer to Arduino because I wanted the Uno R3 board and considered the extras (breadboard, jumper wires, sensors, etc.) to be a amazing starting point for a few additional dollars. The board is amazing quality, and I've had 0 issues. I hadn't given the educational materials much thought and figured I'd lean on the Arduino website/community for most of my learning. However, I was quite happy to search the included guides and examples were extensive and enjoyable, and I spent most of a weekend going through all 24 of the lessons (Note: I downloaded recent versions directly from the manufacturer www service since I don't have a CD-ROM drive). The materials come in several various languages, and also contain the datasheets for each of the components. The lessons teach you how to load needed code libraries, and generally contain them in each folder, however, I ran into some minor problems with a lesson containing outdated information/libraries. It was simple enough to google and search the fix, but a beginner could avoid the frustration by just skipping over that lesson and they wouldn't be out much. Overall, I highly recommend this as a starter kit for anyone looking to obtain started with Arduino.

    0  


  • 0

    Useful review?

    ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE []  2020-6-28 18:4

    This is an amazing kit! I want I could give it 5 stars but there were a couple problems which Elegoo hopefully will resolve in the future. Please be sure to check the date of this review since they may create improvements at a later at said, I still will highly recommend this kit for those who wish to obtain started with electronics and programming. The kit includes a amazing a lot of parts to experiment with. The guides were simple enough to figure out and I had very small problem getting things to work. I was pleasantly surprised at how simple it was to build and work with the projects, even to experiment with them and the s:- Mostly simple to use- Lots of amazing parts- Inexpensive- Compatible with Windows, Mac and Linux- Works with the official Arduino IDE and Arduino C language- The C language that the Arduino IDE uses is very simple, even for a total beginner. Everything is explained clearly.- Contains libraries that work with the parts (easy to install the libraries in the Arduino IDE)- Contains guides and sample code you can copy and experiment with.- Compact. Doesn't take up a lot of zone on your workbench. You could take it with you!- Not too hard to set up in LinuxCons:- The case it comes in is rather little and parts are compacted in the case. Once out and in use, it's hard to obtain everything back in. Particularly if you wish to reorganize the parts yourself.- Resistors come on a tape. Once you pull them apart, it would be hard to place things back. Probably would be most helpful if resistors were in labeled bags and pre-bent so you can just grab one and stick it in the breadboard. Tape residue may interfere with contact in breadboard.- Sometimes parts and wires are hard to place in the breadboard and "stick" or bend the leads instead of going all the method in. Suggest that they improve the breadboard contacts somehow.- The files on the CD are very long names, and some files are in two places, becoming redundant.- Guide is simple to figure out, but lacks full instructions for Linux.- Guide lesson numbers are off. Some lessons present one lesson number but say to use another number for the source code. There are some gramatical and editorial errors throughout the tutorial.- Elegoo doesn't seem to help or know too much about Linux systems. This is still the method a lot of companies operate as it seems not a lot of think people are using Linux e following Cons may not be Elegoo's fault but rather the fault of the Official Arduino IDE:- Installer script doesn't catch it if someone attempts to install as root. You should install as user, not root.- Installer script uses xdg to install the menu icons. This causes some issues and errors on some system (it did on my Debian 9 / Stretch system). To avoid issues with a file not being present, add this to the script after xdg_install_f() { # Added: Make the dummy file (required) ls filename >/dev/null 2>&1 if [ ! $? = 0 ]; then echo > ${HOME}/.local/share/icons/hicolor/.xdg-icon-resource-dummy fiAlso, you still obtain errors such as this:Could not parse file "/home/me_user/.local/share/applications/your_sktop": Invalid key name: Path[$e]and there will be one of these for EVERY program you installed after you installed your operating system. I don't know of any fix for this but these errors you can apparently safely ignore.- Connecting the Uno to Linux requires that you do the following and reboot first so that you have permission to use the board connection:ls -l /dev/ttyUSB* or ls -l /dev/ttyACM*You should see something like:crw-rw---- 1 root uucp 188, 0 5 apr 23.01 ttyUSB0 orcrw-rw---- 1 root dialout 188, 0 5 apr 23.01 ttyACM0What you wish to do is add yourself to the uucp or dialout group (uucp if both present up). For my system I had to add my user to the dialout group:sudo usermod -aG dialout me_userBe sure to reboot so that the changes take effect.- The programs (called "sketches") require being in a directory the same name as the filename of the sketch, even if the only thing you have is the sketch file. This is rather inconvenient to have to go into every directory and double-click on a sketch file. It would be nice to be able to just save the sketch file, double-click and not have to have each one inside it's own :I have had the occasion to email their help a couple times. They are pleasant to work with. But not very knowledgeable about Linux (as mentioned above). They do seem to do their best to support the customer. For the record, they are a Chinese company so those in other countries may need to exhibit a small patience due to possible language barriers. I found if they don't seem to respond your question correctly, it's best to just test again and reword the question a small more simply. They seem like very nice folks and do their best to mmary:As I said, I'd have given this 5 stars if it weren't for the above issues. But it may be by the time someone reads this review that some or all of these problems would be resolved. Please check the date of the review and if in question, contact Elegoo and ask if the problem was corrected.

    0  


  • 0

    Useful review?

    ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items) []  2020-6-28 18:4

    An outstanding value! All components are very sturdy and solders look clean and strong. My son and I went through most of the canned example projects over several weekends. Hours of high quality bonding time, where both of us got our first exposure to micro-controllers and coding. All sample projects are super easy to set up, and all of them work great. While understanding how the C code works is beyond my forte, it was till plenty fun to create little tweaks to some parameters in the code and watch what happens. My son has already asked me to obtain the robot vehicle kit ... project for father's day!!The kit that I first received had a few stuff missing so we couldn't complete a few of the projects. My son kept bugging me to obtain the missing parts, and I kept procrastinating for about 3 months, and almost gave up contacting Amazon thinking it was too late and past the window of no-return.On a whim I emailed the Elegoo (the manufacturer). I was very happy to obtain a prompt answer explaining that Amazon had probably sent me a returned item. And promptly, Elegoo shipped me a brand fresh kit at their own expense, even though it was Amazon's mistake. Really outstanding customer service!

    0  


  • 0

    Useful review?

    Arduino Essentials []  2019-12-24 19:55

    Amazing read about the current Arduino boards out there .. Amazing reference for those who wish to learn about these cool boards and how to hook up hard devices and parts to them . Amazing put to kick begin using the Arduino boards.

    0  


  • 0

    Useful review?

    Arduino Tutorials [App]  2019-12-28 21:10

    Its really nice i obtain what i wish (in organised manner )

    0  


  • 0

    Useful review?

    Arduino Tutorials [App]  2019-12-28 21:10

    its awesome and very useful for all students

    0  


  • 0

    Useful review?

    Arduino Tutorials [App]  2019-12-28 21:10

    very usefull application

    0  


  • 0

    Useful review?

    Arduino Tutorials [App]  2019-12-28 21:10

    Nice

    0  



    Search Cloud

    About us

    Use our product reviews finder and generate tons of ratings & opinions on any item, shop product or service. Search, read and publish reviews for brands, TV shows, ebooks, gadgets, video games, meals, music, household items or movies. Would you like to rate recently purchased thing? Go ahead! Express satisfaction or sadness, describe own experience & identify strengths and weaknesses of the product. Write short or detailed review with a few clicks.

    Community

    Publish review of any item you find here, registration is not required
    Share own experience, point out the pros and cons, warn or recommend
    Search for opinions on any item, product or service, read tons of reviews

    Contact

    www.add-reviews.com

    Use contact form to reach us or write a message via email:

    [email protected]

    Describe your problem, share ideas or report a bug on the site.

    https://add-reviews.com/
    0856-458-386